User Guide

10
Remote control
• 

PLAY /

PAUSE : By pressing this button, you start CD playback or interrupt/resume
CD playback (pause).
• 

STOP / 

OPEN : By pressing this button, you stop CD playback or open/close CD
tray.
• 

PREV / 

REW : By pressing this button during playback, you move to the previous
CD track or, holding it down for a few seconds, activate fast rewind search. When
playback is stopped, you may choose the CD track from which to resume playback or
search backward through the CD tracks.
• 

NEXT / 

FFW: By pressing this button during playback, you move to the next CD
track or, holding it down for a few seconds, activate fast forward search. When playback
is stopped, you may choose the CD track from which to resume playback or search
forward through the CD tracks.
• 0123456789 (NUMERIC KEYS): According to the functioning state of the CD player
you have two different actions:
- when the CD player is stopped it is possible to select a track pressing the
number of the correspondent song (the unit waits for PLAY to be pressed).
- when the CD player is playing, pressing the number of the desired song it
immediately skips to the indicated track.
• TIME / MENU: this switch controls two different functions: if it is pressed while the unit is
playing it controls the TIME functions, while if it is pressed when the unit is in STOP
mode it lets the unit enter into the setup menu and, if the unit is already in SETUP, it lets
it exit the set up mode and go back to normal operation mode.
Time function: pressing the switch when the unit is playing permits you to visualize
different track-time information.
- the time that is left until the end of the song, modality “end of track” (the
display shows “_” between the indication of the minutes and the seconds).
- the time that is left until the end of the CD, modality “end of disc” (the
display shows “•“ between the indication of the minutes and the seconds).
- The time that has gone by since the beginning of the CD, modality “total
time” (the display shows “.“ between the indication of the minutes and the
seconds).
Menu function: to manage the menu the unit must be in stop mode. For details about
the menu refer to the specific part in this manual.
• STANDBY CD: By pressing this button, you activate/deactivate standby mode.
• RPT (REPEAT) This key has different functions according to the functioning state of the CD player:
- when the CD player is stopped it is possible to choose to repeat a track or the entire disc by pressing the key once or
twice. To choose to repeat a track you press the keys PREV and NEXT to select the track to repeat or select the track
directly by its number using the numeric keys on the remote.
- when the CD player is playing, pressing this key in two different moments determines the initial instant (A) and final (B) of
an arbitrary section to repeat. When this option is active, you can de-activate it by pressing the key again, and the normal
playback of the CD is re-established.
- SHUFFLE function (REPEAT MIX), this playing mode is enabled with the unit in STOP state and permits random playback
of the tracks. While playing you can randomly change the played track with the switches NEXT and PREV on the front
panel or on the remote.