AUDIO ANALOGUE Crescendo CD COMPACT DISC PLAYER OWNER’S MANUAL MANUALE D’ISTRUZIONI Manual rev 1.
Dear Audiophile, Congratulations and thank you for choosing the CRESCENDO CD Player. A product which perfectly exemplifies the state of Art of the Audio Analogue CD Player: Features: Power supply: a toroidal transformer is used with secondary stages dedicated to each part: one to the analog/DAC section power supply and the others to the digital power supply.
INTRODUCTION AUDIO ANALOGUE does not take any responsibilities in the following cases: Whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected. Whenever damages to the equipment occur because of fixing and modifications made form non-authorized staff or because of normal deterioration of the system.
PREMESSA AUDIO ANALOGUE non accetta responsabilità nei casi in cui: Le procedure operative di utilizzo e manutenzione dell’apparato descritte nel manuale non siano rispettate. I danni si verifichino in seguito a riparazioni o modifiche dell’apparato eseguite da personale non autorizzato o a seguito di normale deterioramento dell’apparato.
7 8 2 3 1 4 5 6 Front panel 1) Power Switch. 2) CD tray 3) STOP/OPEN. When playback is stooped, it allows Opens/closes CD tray. During playback Stops CD playback 4) PREV/REW. During playback, starts previous CD track playback, a long pressure ability Fast rewind search. When playback is stopped, it allows choosing the CD track from which resuming playback or search CD tracks backward. 5) NEXT/FFW. During playback, starts next CD track playback, a long pressure ability Fast forward search.
Description of the remote controller: CD PLAYER Functions • • • • • PLAY / PAUSE STOP / OPEN PREV / REW NEXT / FFW 0123456789 (NUMERIC KEYS): According to the functioning state of the CD player you have two different actions: - when the CD player is in stop it is possible to select a track pressing the number of the correspondent song (the unit waits for PLAY to be pressed). - When the CD player is playing, pressing the number of the desired song it immediately skips to the indicated track.
While the unit is in SLEEP MODE the icon of a watch can be seen blinking on the dispaly. TRACK 12 Θ TOTAL TIME 65:47 TRACK 02 TIME 65:47 Θ It shows that the SLEEP function is on when the unit is in STOP mode It shows that the SLEEP function is on when the unit is in play mode. When the SLEEP function is on you can visualize the time that remains before the unit enters the Stand By mode entering into the menu and reading at the voice: SLEEP.
Remote controller - Descrizione del telecomando: Funzioni del CD PLAYER • • • • • PLAY / PAUSE STOP / OPEN PREV / REW NEXT / FFW 0123456789 (TASTI NUMERICI): a seconda dello stato di funzionamento del CD player si hanno due differenti comportamenti: - Quando il CD player è in stop è possibile selezionare una traccia digitando il numero del brano corrispondente, l’apparecchio rimane in attesa del comando di riproduzione (PLAY).
Durante la modalità SLEEP viene visualizzato sul display l’icona di un orologio che lampeggia: TRACK 12 Θ TOTAL TIME 65:47 TRACK 02 TIME 65:47 visualizzazione dell’indicazione della modalità SLEEP in modalità stop visualizzazione dell’indicazione della modalità SLEEP in modalità riproduzione Θ E’ possibile inoltre visualizzare il tempo residuo all’auto-spegnimento entrando nel menù SETUP alla voce SLEEP MENU SLEEP TIMER 26 visualizzazione del tempo residuo: 26 minuti NOTA: in modalità SLEEP attiva
Plugging in and connecting up CRESCENDO CD Player Before connecting CRESCENDO CD Player to an amplifier, please be sure that they’re both unplugged from wall outlets. First of all, connect the CRESCENDO CD Player stereo output to your integrated amplifier/preamplifier’s input you want to use. Please use only high-quality cords with gold plated connectors. At last, check the main switch is in OFF position and then plug the power cord into the CRESCENDO CD Player inlet and into the wall outlet.
Stand-by Il CRESCENDO CD player può essere posto in stand-by premendo il pulsante “STANDBY CD” sul telecomando oppure tenendo premuto il tasto STOP sul pannello frontale per alcuni secondi. Quando l’apparecchio è in stand-by, i circuiti analogici e l’ alimentazione della meccanica CD sono spente per minimizzare i consumi.
TROUBLESHOOTING Symptome Cause Unit is in stand-by mode Display is off No sound Power cord incorrectly plugged Burned-out fuses Display is on No sound CD player is on but the display is off Remedy Push STBY button on the remote controller or the button on the front panel, switch on the main power supply switch on the front panel Make sure the power cord is correctly plugged into the wall outlet Check fuses in the fuse panel (after unplugging the power cord from the wall outlet) above the IEC inlet
WARNING! All of our CD players may not be able to read some specific CD’s manufactured with a unique protection system against copying. If in doubt, please try to read the CD using a PC CD-ROM drive. When the CD-ROM drive is incapable of accessing the tracks on the CD, please do not play the CD in question with the our CD players. Although there is generally no problem with hybrid SACD’s, please check for any copy protection system in the CD layer.
A. INFORMATION ON DISPOSAL FOR USERS (PRIVATE HOUSEHOLDS) 1 In The European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin. Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Audio Analogue Manufactured and Distributed by: AUDIO FUTURA spa Via Maestri Del Lavoro 583 51015 Monsummano Terme (PT) Italy Tel. 0572 954513 fax 0572 958099 www.audioanalogue.com - info@audioanalogue.
