User Manual Model 1332 and 1334 2x1 and 4x1 DVI Switcher with HDCP
Table Of Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . 4 2.0 Specifications 3.0 Checking Package Contents . . . . . . . . . . . . . . . 7 4.0 Connecting The Hardware 5.0 Operating The Unit . . . . . . . . . . . . . . . . . . . 7 6.0 Troubleshooting . . . . . . . . . . . . . . . . . . . . . 9 7.0 Limited Warranty . . . . . . . . . . . . . . . . . . . 10 8.0 Regulatory Compliance . . . . . . . . . . . . . . . . 11 9.0 Contact Information . . . . . . . . . . . . . .
1.0 INTRODUCTION Thanks for purchasing this 1332 or 1334 HDCP (High-bandwidth Digital Copy Protection) compliant DVI Switcher from Audio Authority. The 1332 and 1334 DVI Switchers are designed to allow the switching of multiple HDCP compliant DVI signals to one DVI HDCP complaint display device. Audio Authority also offers an extensive line of audio and video switchers, converters and distribution amps available for purchase online at www.audioauthority.com. 1.
2.0 SPECIFICATIONS Performance HDTV Resolutions Supported 480i, 480p, 720p, 1080i, 1080p Maximum PC Resolution 1920 X 1200 @ 60Hz (WUXGA) Bandwidth 165MHz DVI Source Port Connectors 2x or 4x DVI-I 29 pin female Display Device Port Connector 1x DVI-I 29 pin female Display device selection Push Button or Remote Mechanical Dimension (H-W-D) 1.5”x6.3”x2.
Model 1332 2x1 DVI Switcher Model 1334 4x1 DVI Switcher 6
3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, please check the packaging and make certain the following items are contained in the shipping carton: • 1332 or 1334 DVI Switcher with Remote Control • DVI Cable • 9 VDC AC Adapter • User Manual Note: Please retain the original packing material should the need ever arise to return the unit. If you find any items are missing, contact Audio Authority immediately.
5.2 Remote Control Selection Input selection is also possible using the provided remote by pressing the appropriate button. If you have a problem with the IR control conflicting with other devices, the remote allows users to reconfigure four (A, B, C, D) alternate combinations of IR codes. The default code is A. Push and hold the IR code button (A, B, C or D) on remote control panel for 2 seconds. The 7-segment LED display will show the IR code for one second when the new IR code is set.
6.0 TROUBLESHOOTING If the switcher does not appear to be functioning, make certain that all the DVI sources and the DVI capable monitor are functioning correctly by connecting each DVI source in turn directly to the monitor using a cable with a length of 6 feet or less. If the signal is present under those conditions, make certain that the power is present on the switcher. If it is, measure the cable length you are attempting to use between the sources to the switcher and the switcher to the monitor.
7.0 LIMITED WARRANTY Should any consumer product from Audio Authority fail due to defects in materials or workmanship within one year from the date of the original sale to the end-user, Audio Authority guarantees that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by Audio Authority (Ground service only).
8.0 REGULATORY COMPLIANCE The 1332 and 1334 DVI Distribution Amplifier have been tested for compliance with FCC and CE Regulations. The Power Adaptor/Supply has been tested for compliance with UL, CSA & CE Regulations. 9.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact Audio Authority using the information below.
2048 Mercer Road, Lexington, Kentucky 40511-1071 Phone: 859/233-4599 • Fax: 859/233-4510 Customer Toll-Free USA & Canada: 800/322-8346 Website: http://www.audioauthority.
