Installation and Operation IR AUTO 1 2 3 Model 1154B 4 High Definition AV AutoSelector™
Getting Started • • • • • • Register your purchase at www.audioauthority.
Panel Descriptions Shown below are the front and back views of the 1154B, and to the right, a view of the 580-023 Infrared Remote Control.
Installation 1. Model 1154B Hookup. Connect sources, receiver, and monitor in these steps. a. If the AutoSelect feature is to be used, decide now if any devices should be connected directly to the TV or receiver, particularly if the sources include a device that can record. Also consider the priority arrangement of the sources (see About AutoSelect on page 5). b. Connect each source unit to its respective set of Model 1154B input jacks. c.
2. Initial Testing. Connect the furnished 12 volt power supply, then perform the following steps: a. Check that one or more panel indicator lights are illuminated. b. Apply power to all associated equipment. Touch the input selection keys 1-4 to manually select sources to verify video and audio signal integrity. 3. Remote Control. The Model 1154B can select sources by infrared remote (Model 581-023).
Operation The Model 1154B allows you to select one of up to four video/audio sources to play through your home theater system. Each of the four input keys lights green if an input is detected, and red if the input is selected (see below). Generally, the most recent input to be detected is the one that the 1154B AutoSelects.
Specifications Specifications are subject to change without notice.
2048 Mercer Road, Lexington, Kentucky 40511-1071 Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 Website: http://www.audioauthority.
