Specifications

FCS1362 Page 61 of 74 © Nov 2010
Sample form 2
Mobile Installation Check List – Page 1 of 2
Job Number: …………….. Date start: ………….………. Sheet ……... of ….…...
Installation location: …………………………………………..…… Customer & Ref. No: …………………….….…………..
Vehicle Type and Model: …………………………………………..…………………………………………………………..……
Reg. Number: ………………………………….. VIN Number: …………………………………………………………..…...…
Instruction / Type of equipment:
Table 1. Mark the table: N (Not applicable), (Pass - OK), X (Fail). Column A = Pre-fit, B = Post fit, E: EMC tests. See below
Checked Item A
B
E
1
E
2
Checked Item A
B
E
1
E
2
Checked Item A
B
E
1
E
2
Side Lights Clock Electric windows
Headlights dip/main Dashboard lights Electrical aerial
Spot/fog lights Dash warning lights External bodywork
Stop lights Entertainment unit Head lining
Reversing lights Wipers front/rear Internal trim & seats
Boot/tailgate lights Screen wash Engine Speed
Indicators left/right Headlamp wash/wipe Rev’ & speed meters
Courtesy lights Horn Blue Lights & Siren
Hazard indicators Central lock & alarm
Notes:
Engineer’s Signature: …………….……...………… Customer’s Signature…………….…….…..…..…... (For vehicle arrival)
Table 2. Complete the following table, listing all equipment installed or removed. Also describe the installed equipment location.
Equipment Manufacturer – Model number – Serial number – E-Compliance number – RF Output power (Watts)
Transceiver 1 RF O/P:
Location:
Transceiver 2 RF O/P:
Location:
Control Unit(s)
Location:
Aerial & Base 1 Type & Location VSWR 1:
Aerial & Base 2 Type & Location VSWR 1:
Aerial & Base 3 Type & Location VSWR 1:
Loudspeaker Type & Location
Location:
Location: