User manual

10
11
6.0 TROUBLESHOOTING
• First check for faulty cables or bad connections.
• If you see no video image, the 1362 may be set to the wrong
input. If it is on, turn off the OSD menu (left corner) by pressing
the menu button, or cycle power on the 1362. Press the + button
until you see a picture on the display (you should see the input
menu in the upper right of the display). If you cannot see the input
menu, try switching picture modes, or try a different 1362 output
resolution such as 720p that may better t your screen.
• If you still see no video image, simultaneously press menu and –
buttons to reset the 1362 to 480p (for HDTV). If your display device
is a PC monitor, reset to XGA by pressing the + and – buttons.
• If all connections are correct, the output setting is most likely
the problem. Make sure the display is capable of accepting the
resolution and refresh rate selected and make sure the output
format selected (RGB or YPbPr) is appropriate for the type of cable
being used at the output.
If none of these measures solve the problem, call Audio Authority
Technical Support at 800-322-8346 Monday through Friday, 8:30am
to 5:00 pm EST, or e-mail support@audioauthority.com.