User manual
6
7
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make certain the following items are contained in the shipping
carton:
• Model 1362 scaler unit
• 100~240VAC AC/DC power adapter
• Composite video input cable
• 8 Pin Mini-DIN to 3 RCA cable
• 6 ft HD15M cable (a.k.a. VGA to VGA)
• User manual
Note: Please keep the original packing material in case the unit
ever needs to be returned. If you nd any items are missing,
contact Audio Authority immediately. Have the model number,
serial number and invoice available for reference when you call.
4.0 CONNECTING THE HARDWARE
The rst step is to connect a video source to one of the inputs of
the 1362 and to connect its output to a display device. The drawing
of the unit shows the location of the inputs, output and power
connectors.
4.1 Connecting an Input
The 1362 can accept composite Video, S-Video or YCbCr inputs.
Composite video is connected to the scaler via the RCA connector, S-
video connects via the 4-Pin Mini-DIN connector and YCbCr connects
via the 8-Pin Mini-DIN connector using the 3-RCA to 8-Pin Mini-DIN
cable provided.
Proper signal levels are very important to the operation of this
product so make sure your inputs are of the levels specied on page
4. If the unit does not seem to function correctly after all instructions
in this manual are followed, and the unit has power, the most likely
cause of the problem is high or low signal levels or the use of the
wrong input cable. Be sure to follow instructions in 5.0.
YCbCr
IN
SV
IN
CV
IN
DC 5V
PC/HD OUT
480p XGA
MENU