User manual

8
9
5.2 Menu Map
Level 1 Options Level 2 Options Description
Picture Adjust Brightness Adjust image brightness
Contrast Adjust image contrast
Color Adjust image color
Tint Adjust image tint
H. Peaking Filter NA
Sharpness Adjust image sharpness
V. Peaking Gain NA
Reset Reset to factory defaults
Exit Return to main menu
Display Setup Timing Adjust output resolution
C S C Adjust output format (YPbPr/RGBHV)
Exit Return to main menu
Advanced Setup Film Mode Select between auto or off for lm
detection
OSD Display Turn On Screen Display on or off
No Signal Select blue or black screen when no
signal is detected
Exit Return to main menu
System Information Input Mode Displays current input format
Display Timing Displays current output resolution
Exit Return to main menu
Pressing the menu button displays the main
menu. Move the cursor to the desired setup
option by using the + and – buttons. When
you reach the option you desire, press the
menu button again to select that option.
Once the desired option is reached and selected, a new menu
appears; use the + and – keys to select the parameter you wish to
change or adjust.
Picture Adjust
Display Setup
Advanced Setup
System Information
Exit