User manual

8
9
5.3 Setup Example
If you select the rst item on the main
menu, Picture Adjust, a secondary menu
shows these items:
If you want to change the color level for
example, you would use the + and – keys, to
navigate to that Item on the menu and press
the menu key again to select that option.
When color is selected, a sub-menu for the adjustment appears:
Color 48
Use the + and – buttons to increase or decrease the value of the
setting. Press menu again to leave the setting. Move the arrow to
exit and press menu/enter again to exit.
5.4 Display Setup
When this is selected, an output resolution sub-menu appears:
PC HDTV
UXGA 1600x1200@50/60Hz 720p-YPbPr 1280x720@50/60Hz
SXGA 1280x1024@50/60Hz 576p-YPbPr 720x576@50/60Hz
WXGA 1280x768@50/60Hz 480p-YPbPr 720x480@50/60Hz
XGA 1024x768@50/60/70/75/85Hz 1080i-YPbPr 1920x1080@50/60Hz
SVGA 800x600@60/72/75/85Hz 1080p-YPbPr 1920x1080@50/60Hz
VGA 640x480@60/72/75/85Hz
(1080i is actually 540p doubled - see Note on Page 4)
Use the + and – buttons to choose the desired PC or HDTV output
resolution from the available selections in the sub-menu.
5.5 Advanced Setup
Advanced setup allows you to turn off the Film Mode (3:2 pull
down), turn off the OSD (On Screen Display), and set the “no signal”
display to either blue or black.
5.6 System Information
When this is selected, the OSD allows changes to be made to the
1362’s current output resolution and vertical refresh rate.
Brightness
Contrast
Color
Tint
H Peaking Filter
Sharpness
V Peaking Filter
Reset
Exit