User Manual Model 1398B ® Distribution Amplifier CLUX-8M3D HDMI OUT OUTPUT 7 HDMI OUT OUTPUT 8 1:8 Distribution Amp HDMI SPLITTER SYNC=RED SYNC-RED HDMI INPUTIN HDMI OUT OUTPUT 1 POWER 3D=ORANGE 3D-ORG 5V DC DC 5V POWER OUTPUT 2 EDID STD TV OUTPUT 3 Model 1398B Audio Authority® Corporation OUTPUT 4 OUTPUT 5 800-322-8346 • 859-233-4599 • www.audioauthority.
Liability Statement Every effort has been made to ensure that this product is free of defects. Audio Authority® cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user of the hardware to check that it is suitable for his/her requirements and that it is installed correctly. All rights reserved.
Model 1398B ® Distribution Amplifier Table Of Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 2.0 Checking Package Contents . . . . . . . . . . . . . . . . 4 3.0 Getting the Best Results . . . . . . . . . . . . . . . . . . 5 4.0 Planning a Distribution System . . . . . . . . . . . . . . 5 5.0 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 6 6.
1.0 INTRODUCTION Thanks for purchasing this Model 1398B signal distribution amplifier from Audio Authority®. These distribution amplifiers are designed to split an HDMI® signal from one source to multiple HDMI displays without signal degradation or loss of encryption. The 1398B is HDCP 1.1 compliant, and HDMI v1.3 compliant, supporting 3d content, deep color video and Dolby TrueHD and DTS-HD Master Audio.
Resolution Refresh Rate Bit Depth Higher Lower Shorter Distance Longer Distance 3.0 GETTING THE BEST RESULTS Many factors influence the quality and reliability of HDMI signal distribution installations. The following are the main factors to consider, and basic precautions that will ensure the best possible performance. • Resolution tracking. Set up the source to output the best resolution that all TVs are capable of displaying. Follow the instructions in 4.
only 720p video signals. You may consider creating two or three separate distribution systems with different sources and different output resolutions so that you can adequately demonstrate the highest resolution HDTV sets. • HDMI cable lengths of up to 100 ft. between amplifiers may be possible, when premium cables are utilized. Use of high resolutions, refresh rate, or deep color may limit maximum cable run length.
• Make certain that the HDMI cables are securely plugged into the source and display devices as well as the 1398B. Always use high quality cables, and the shortest length possible, for best results. • Turn on the HDMI source and HDMI destination devices and observe the source signal on the inputs of all of the destination devices. The 1398B front panel LED lights up, indicating 2D or 3D sync. • The unit begins to function as soon as the AC adapter is connected to the unit and AC power.
6.0 TROUBLESHOOTING • For 1080p resolution, first make certain that the input cable is as short as possible and none of the output cables are more than 30 meters long. HDMI cable design and quality are extremely important in long cable runs where capacitance can severely effect performance. Our 1391A Extender/ DDC Corrector may be a necessary accessory to use in extreme length applications. • Make certain that the distribution amplifier is receiving power by looking at the power LED.
7.0 SPECIFICATIONS Compliance HDMI 1.3 compliant HDCP 1.1 compliant Video Inputs HDMI (all models) 1x via HDMI connector (Type A) Video Output 1394 HDMI 4x via HDMI connector (Type A) 1398 HDMI 8x via HDMI connector (Type A) HDMI HD-Audio, including Dolby® TrueHD & DTSHD: Master Audio, Dolby Digital Plus Audio bandwidth 20Hz to 20 KHz Data rate 2.
8.0 LIMITED WARRANTY Should any consumer product from Audio Authority fail due to defects in materials or workmanship within one year from the date of the original sale to the enduser, Audio Authority guarantees that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by Audio Authority (Ground service only).
9.0 REGULATORY COMPLIANCE Model 1398B distribution amplifiers have been tested for compliance with appropriate FCC and CE rules and regulations and are also RoHS compliant. The power adaptor has been tested for compliance with UL, CE and CSA rules and regulations and is also RoHS compliant. 10.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact Audio Authority using the information below.
2048 Mercer Road, Lexington, Kentucky 40511-1071 Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 Website: http://www.audioauthority.