Installation and Operation Component Video/Audio Source Inputs Dual Cat 5 Outputs to Zone Receivers
WARNING: AVERTISSEMENT: 100-125V~ 50-60 Hz Pour réduire les risques d’incendie ou de choc To reduce the risk of fire or electric shock, Replace do Fuse Only with not expose this apparatus to rain or moisture. T 2.
Installation and Operation Manual This document is consistent with HLX configurations that include Model 2114 and 2248 cards, with features in firmware version 1.0 Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The HLX Product Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introducing HLX The HLX Series of modular matrix systems is designed to be easy to control, expand, and customize for a wide range of audio/video applications. It features multiple control interfaces, a flexible number of video and audio inputs/ outputs, and an ultra-wide bandwidth bus which enables large matrix systems with no loss in signal quality. The HLX Series offers IR, RS-232 and Ethernet control. Dual Cat 5 output cards feature pathways for IR control signals originating in the zones.
Panel Descriptions Shown below is a Model 2006 card cage at full capacity. A B C D E F G H Ethernet communication port RS-232 serial communication port IR input via 3.
A HLX System Design The basic HLX Series components covered in this manual include the Model 2006 card cage, AV source cards and AV zone cards, as described below. For information about expansion card cage, and other source and zone cards, refer to the item’s separate manual. Cat 5 zone cards require Audio Authority zone receivers. Three Dual Cat 5 styles are available, and two single Cat 5 styles. See page 18 for complete information about zone receiver features.
Installation 1. Read this entire instruction manual. Other Items Required for Installation 2. Confirm that nothing is missing from your shipping carton (see below). • Audio Authority Cat 5 Zone Receivers 3. Activate your warranty and receive future update notifications by registering your purchase on our website: www.audioauthority.com/register. • Professional Category 5e/6 cable tester* 4. Write the serial number (see product rear panel) inside the back cover of this manual. 5.
Hardware Installation The HLX system is designed to be mounted in a standard 19-inch equipment rack. Secure the card cage to the rails with all four screws (supplied). If your system includes an expansion card cage (Model 2014) install it first, then carefully seat the main HLX card cage onto the multi-pin connector and fasten it to the rack. Check that each preinstalled card is properly seated and secured in the card cage.
Control Options Choosing a Control Interface Ethernet Front Panel IR Zone IR Panel Controls Most commands are available on Ethernet, IR and RS-232, but there are differences as shown below. RS-232 Centralized serial Ethernet control systems provide the most robust and complete HLX control, however, comprehensive IR controllers and zone IR control are good alternatives for most day to day activities.
RF Base Station (or Wired Keypad System) The IR IN jack on HLX zone cards allows controllers at the head end to mimic sending commands from the zones. DO NOT TURN ON IR +12V SWITCH IN THIS APPLICATION IR IN ZONE RECEIVER IR OUT OFF RF Remote for Zone 1 +12V 1 A B RF signals sent to Base Station CAT 5 ZONE 1 IR OUTPUT 1 2 3 4 5 6 RF BASE STATION IR Control to Zones An IR controller connected to the HLX IR OUT jack can send IR to the zone. The , or powered with 12 volts from the HLX.
Comprehensive IR Control System The HLX can be used right out of the box; no setup is necessary. Comprehensive IR controllers can use the complete HLX IR code set, along with the codes of the sources. HLX volume controls are not included in this code 1. Patch the IR signal directly to the IR input port on the rear panel using a standard 3.5mm cable or, place a stick-on emitter or blaster from the infrared system on the HLX front panel optical IR receiver.
4. [SOURCE1] – switch zone 1 back to watching/listening to source 1. The temporary restriction is canceled by switching away from the restricted source. 5. [LOCK CONTROL] – temporarily restrict zones 2-8 from passing IR control to source 1. For example, source 1 may be connected to a DVD player. Zones 2-8 would be unable to use DVD player IR remote commands to enter commands such as stop, pause, skip, etc. 6. [UNLOCK] – removes the temporary restriction of controlling source 1. 7.
Serial and Ethernet Control Setup Serial Control Serial commands can be used at any time via RS-232 or Ethernet to change the HLX settings. See page 19 for a complete list of commands.
Troubleshooting IR Interference Rail Voltage Failure (four blinks) There are many sources of possible IR interference including LCD/Plasma screens, fluorescent lights, or space heaters. IR receivers are unable to operate properly in the presence of significant interference. The card has determined that the voltage powering the card is insufficient for proper operation. 1. Eliminate source of interference and use Plasma-proof and/or LCD-proof IR receivers 1. Power off the system.
Updating HLX Firmware The latest firmware is available to download to your PC from www.audioauthority.com/page/software. Two separate update processes are used for HLX firmware: Card Update and System update. These updates are performed from one firmware file (FILENAME.SMM). Updating Zone and Source Cards 1. Place the USB drive containing the latest operating system data into the HLX USB port. 2. Touch MENU. The setup menu appears. Scroll and choose “Update Firmware”. 3.
HLX System Design Rules Note: Call Audio Authority Technical Support when performing any in-field upgrades. shifting zone cards down if necessary. Zone cards should be added in the next available slot, below the existing zone cards. Audio Authority can help you choose the correct source and zone cards for your application, or you can use our website to configure a system. Source Cards Card Placement Rules Source cards must be placed into the top two or three slots.
Zone Receivers • Model 9878 • dual-gang wallplate receiver, stainless steel, shallow mounting depth with antenna pass-through jack • Model 9879 • single-gang wallplate, Decora style with front and rear facing IR inputs • Model 9880 • surface mount receiver, can be mounted on any surface • Model 1180RD • single-gang, single Cat 5 wallplate, Decora style (does not have analog audio or IR) • Model 1180R • surface mount receiver (does not have analog audio or IR), can be mounted on any surface Cat 5 Zone Recei
HLX Commands • Commands that pertain to audio cards are specified in a separate user manual. • The @ symbol represents up to 16 characters. • All switching is assumed to be audio/video unless specified. Zone/Source Switching Description Command Structure Example Commands Example Output Result Switch a zone output to a source input [CO###I##] [CO1I2] (CO1I2) Zone output 1 is connected to source input 2.
Groups Query a group [QG##] [QG10] (QG10) (NG10”Empty Group”) Group 10 has no members and is named “Empty Group”. Add a zone to a group [G##AO###] [G1AO3] (G1AO3) Zone 3 is now a member of group 1. Switch all zones in a group to a source [CG##I##] [CG2I4] (CG2I4) All zones in group 2 switch to source input 4. Switch all audio for the zones in a group to a source input [CG##AI##] [CG3AI7] (CG3AI7) Group 3 switch audio to source 7.
Using the PC Configuration Utility The HLX Configuration Utility allows easy setup and configuration of HLX components. It is not a real-time control utility. It may be used to set up groups and favorites, define restrictions, and name sources and zones. The HLX Configuration Utility may be operated directly by serial connection, through Ethernet or in “file mode”. See page 14 for serial and Ethernet connection details. In file mode, the utility saves a script file (CONFIG.
Import/Load File Opens an exported or previously created config file on the computer Favorites A Favorite is a “scene preset” that assigns a particular source to each zone. Export File In file mode, Export File sends file to USB drive. In serial or Ethernet mode, it sends configuration commands directly to the connected HLX system. The utility is able to export configuration file data or human-readable configuration data to USB, Serial, or Ethernet.
Limited Warranty If this product fails due to defects in materials or workmanship within one year from the date of the original sale to the end-user, Audio Authority guarantees that we will replace the defective product at no cost. Freight charges for the replacement unit will be paid by Audio Authority (Ground service only).
Sources Zones 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 22 23 24 Audio Authority HLX Series User Manual 23
2048 Mercer Road, Lexington, Kentucky 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 www.audioauthority.com • support@audioauthority.com v 1.
