Specifications

®
Using the Ethernet Port
(Model 1601 SE only)
To further enhance the exibility
of the Architect amplier, the Model
1601 SE adds a built-in web server.
The server connects to the outside
world using a 10BaseT Ethernet LAN
port and the TCP/IP network protocol.
This network connection serves two
purposes: With it’s built-in web server,
you can access the Architect with any
standard web browser to check on the
ampliers status and do some simple
controls. This interface is also used to
congure the network interface of the
Architect. The second protocol on the
network connection is a Telnet server.
This is primarily used for integration
with whole-house audio control systems (see Appendix Bfor more
details on this protocol). Now let’s see how to use this interface.
To initially setup the Architect amplier and congure the net-
work interface you will need:
• A computer with a 10BaseT Ethernet network adapter
• If you have an ethernet
hub - A standard Ethernet
cable
Or
• If you don’t have a hub
– A Crossover Ethernet cable
Once you have connected
the computer and the Architect
together through the network,
open your web browser soft-
ware (Explorer, Navigator,
Firefox, whatever you like)
and enter the following ad-
dress into your browser:
http://192.168.0.1
You should now see the
Main Operation web page of
the Architect.
Using the Ethernet Port
20
Main Webpage screen shot
Basic Network Setup
Important Note: If you
have several Architects in
your system. Only connect one
at a time to the network until you
have changed their IP addresses.
From the factory the default IP
address is 192.168.0.1. On a TCP/IP
network, each device MUST have a
unique address.