Specifications

Owner’s Enjoyment Manual
AudioControl®
9
❽ Navigation Arrows: These multi-func-
tion buttons perform a number of duties, de
-
pending upon which mode your DQL-8 is in.
You can do anything from applying boost or
cut to your equalization filters to changing the
memories. However, if you get the high score,
you cannot enter your initials!
❾ Output Voltage Indicators: Brightly
colored LED’s indicate the level of signal voltage
that is coming out of the various outputs of your
DQL-8. Use these to assist in level matching your
source unit with your amplifiers.
❿ Outputs: RCA connectors used for wiring
to the next component(s) after the DQL-8, usu
-
ally an amplifier. Do not connect any speakers
directly to your DQL-8 or to any home appli
-
ances, like your toaster.
Power Connections: This incredibly
handy connector is a godsend to those who
have tried to wire up their gear with their body
crammed in the trunk. You can wire up the
power, ground, and remote turn-on from the
convenience of outside your car and then casu
-
ally plug it into your DQL-8.
Output Mode: These cool blue lights indi-
cate the input mode of your DQL-8, as this deter
-
mines which outputs are active. For example, a
two-channel signal will only route the signal to
the “Front Highpass” and “Subwoofer” outputs
whereas a four-channel input will route signals
to all of your outputs.
Level Control: Connect this input to the
remote level control knob. The remote control
can be mounted somewhere convenient, like
in the front of your vehicle. Via the software in
your DQL-8, you can have the remote control
the level of your Subwoofer or the Master Vol
-
ume of your system.