USER MANUAL
10
Quick Start Guide
System #1: Using speaker-level inputs
Notes:
The +12V Power and Ground connections are not shown (see page 9)
Speaker outputs 1 and 2: Stereo, 90 Hz and above, plays inputs 1 and 2, no AccuBASS or ACR-1 eect
Speaker outputs 3 and 4: Stereo, 90 Hz and above, plays inputs 3 and 4, no AccuBASS or ACR-1 eect
Speaker outputs 5 and 6: Mono, 90 Hz and below, plays inputs 1 and 2 (because AccuBASS is on), use ACR-1 to adjust sub level.
ON
CCW
Disable
90 Hz
30-300 Hz
Stereo
Adjust
for Sub
Separate
Disable
90 Hz
High Pass
N/A
Stereo
Separate
Enable
Low Pass
90 Hz
Mono
Factory
Radio
Front left/right
Speaker-level output
90 Hz and above
Rear left/right
Speaker-level output
90 Hz and above
Speaker-level output
90 Hz and below
Front Low Speaker-level output
Rear Speaker-level output
+
+
+
+
ACR-1
Subwoofer
+