User's Manual

- 18 -
A10-RX User Guide
4. Mic2Wav will detect which A10 Receivers are running older versions of Firmware and will
automatically select them to be updated. Otherwise, select the Update check box for each RX
you want to update, and then click Update.
5. Click OK to conrm, if prompted. A status bar will indicate the progress of each A10
Receiver update.
ª Receivers are updated one at a time. As the receiver is updated, its screen will display
Programming and the LEDs will turn off. This is normal operation. After the update, the
receiver’s menu will be available again.
An Update Complete popup appears after all receivers have been updated.