User Manual

Main window



Main controls

● Mute (left/right arrows)

○ No Mute: there is no mute in the instrument’s bell.

○ Straight Mute: adds a straight mute into the instrument’s bell.

○ HarmWah Mute: adds a harm-wah mute in front of the instrument’s bell.

○ Cup Mute: adds a cup mute in front of the instrument’s bell.

○ Hand Mute: simulates a hand in front (or inside) the instrument’s bell.



The HarmWah, CupWah and Hand Mutes can be controlled in real-time through           

the “Mute Control” parameter on the Expressivity page.

● Mute Control: controls the typical ‘wah’ effect when the Mute is set to HarmWah,             

CupWah or Hand Mute. This parameter can be controlled in real time from a MIDI              

device by mapping it to MIDI CC, After Touch or NRPN messages.

● Pipe Model

○ Valves: the instrument model is controlled by Valves.

○ Slide: the instrument model is controlled by a Slide (aka Coulisse).



SWAM Solo Brass - v1.0.1



12

