User Manual

● Controlled By section:

○ Channel: change which MIDI channel this controller will be affected by, from           

1 to 16, or ANY.

○ Message: MIDI message type:

■ CC: Control Change (1 byte value).

■ CC-HIRES: two coupled Control Change messages, MSB and LSB.

■ AT: Aftertouch (1 byte value).

■ NRPN: Non-Registered Parameter Number.

○ CC# MSB: available only for Message = CC, CC-HIRES, NRPN:

■ if Message = CC, MSB is the CC number.

■ if Message = CC-HIRES, MSB is the Most Significant Byte of the           

two-byte hi-resolution message, from CC0 to CC31.

■ if Message = NRPN, MSB is the Most Significant Byte of the two-byte            

NRPN message.

○ CC# LSB: available only for Message = CC-HIRES, NRPN:

■ if Message = CC-HIRES, LSB is the Least Significant Byte of the           

two-byte hi-resolution message, from CC32 to CC63.

■ if Message = NRPN, LSB is the Least Significant Byte of the two-byte            

NRPN message.



NOTE: for details on what MSB, LSB and NRPN are, please refer to MIDI             

specifications at https://midi.org

 



SWAM Solo Brass - v1.0.1



26

