User Manual

SWAM Woodwinds v2.9.0 - User Manual – rev. 1
16
MIDI MAPPING page
The MIDI CC remapper allows you to remap all the control parameters to any MIDI CC depending
on your needs.
All the main parameters of the instrument are assignable to respond to MIDI CCs so they can be
controlled in real-time from a MIDI controller or from a MIDI sequence in a DAW.
It is possible to assign the same MIDI CC to more than one parameter; in addition, it is possible to
act on the Min/Max controls to rescale the input MIDI values.
Note: when the value assigned to “Min” is greater than the value assigned to “Max”, the polarity of
the control is inverted, i.e. the parameter is reduced when the control is increased.
Note: Legato Mode, Sustain, OverBlow, FallDown and MicroTuning have only On (CC>=64) and Off
status (CC<64).