AN Stands ! ! LOUDSPEAKER SUPPORTS OWNERʼS INFORMATION ! !
CONTENTS ! 1) CE DECLARATION OF CONFORMITY DISPOSAL 2) INTRODUCTION 3) OVERVIEW UNPACKING 4) COMPONENTS 5) ASSEMBLY 8) WARRANTY INFORMATION 9) CONTACT INFORMATION
CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC (from 1 January 1997) CE 94 Peter Qvortrup, Director Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: Fax: +44 (0)1273 220 511 +44 (0)1273 731 498 ! DISPOSAL This product must not be disposed of as normal household waste.
INTRODUCTION Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your safety and satisfaction. Please note that due to our desire to continually improve products, specifications are subject to change without notice.
AN LOUDSPEAKER STANDS Congratulations on your purchase of the Audio Note (UK) AN loudspeaker stands. They are a high mass design specifically intended to partner the AN range of Audio Note (UK) loudspeakers. The stands are supplied in kit form and require assembly as per the enclosed instructions before use. The cavities inside the upright pillars should be filled with a suitable high-density material such as metal shot / particles or sand.
COMPONENTS Please take time to familiarize yourself with the component parts of the AN stands. Check that all of the components listed below are present; if any are missing, please contact your Audio Note (UK) Dealer immediately. Alternatively, please feel free to contact us directly.
ASSEMBLY STEP 1: Identify the base plates. These are easily distinguished from the top plates, as they DO NOT have countersunk bolt holes. Select one of them, and set aside the remaining base plate for the second stand. Identify the eight bolt holes that will be used for attaching the four upright pillars (circled in RED in the image to the left). STEP 2: Identify the dome head bolts. Select eight of them, and set aside the remaining eight for the second stand. STEP 3: Identify the upright pillars.
ASSEMBLY continued… STEP 5: Identify the top plates. These are easily distinguished from the base plates, as they have countersunk bolt holes in the top surface. Select one of them, and set aside the remaining top plate for the second stand. The surface WITH the countersunk bolt holes must face UP. STEP 6: Identify the countersunk head bolts. Select eight of them, and set aside the remaining eight for the second stand. STEP 7: Place the top plate on top of the four upright pillars.
ASSEMBLY continued… STEP 9: Add a locking nut to each spike. Screw the spike / nut assemblies into the four threaded bolt holes located in the corners of the base plate. Insert the spikes FROM BELOW, so that the locking nut is UNDERNEATH the base plate. Place the stand in its final position, and level it (using a spirit level positioned on the top plate) by adjusting the four spikes, making sure that all four are contacting with the floor and that the stand does not ʻrockʼ or ʻwobbleʼ.
WARRANTY INFORMATION Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed Audio Note (UK) dealer, and agrees to covers the cost of parts and associated labour required to correct such defects, subject to terms & conditions. This Warranty is offered to the first purchaser only.
CONTACT INFORMATION If in the future your Audio Note (UK) product requires servicing, or if you require technical support or have any questions regarding this or any of our other products, please contact your local Audio Note (UK) dealer. Alternatively, please feel free to contact us directly: -! Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: +44 (0)1273 220 511 Fax: +44 (0)1273 731 498 e-mail: info@audionote.co.
