DAC5 Signature ! DIGITAL TO ANALOGUE CONVERTER OWNER’S INFORMATION ! !
CONTENTS ! 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) AUDIO NOTE DACs 5) INTRODUCTION UNPACKING AND INSTALLATION 7) CONNECTION 10) OPERATION 11) TECHNICAL SPECIFICATIONS 12) WARRANTY INFORMATION 13) CONTACT INFORMATION
! IMPORTANT SAFETY INFORMATION ! RISK OF SHOCK OR ELECTROCUTION! INTERNAL OPERATING VOLTAGES ARE LETHAL! Do not remove top cover, unless specifically instructed to do so in the user manual. This unit contains fuses and other safety components in accordance with BS60065 requirements. In the event of failure, replacement fuse or safety component must be of the same part type and value. ! SUCH REPLACEMENT MUST ONLY BE CARRIED OUT BY A QUALIFIED SERVICE TECHNICIAN.
CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC (from 1 January 1997) CE 94 Peter Qvortrup, Director Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: Fax: +44 (0)1273 220 511 +44 (0)1273 731 498 ! DISPOSAL This product must not be disposed of as normal household waste.
INTRODUCTION Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your safety and satisfaction. Please note that due to our desire to continually improve products, specifications are subject to change without notice.
Audio Note (UK) Digital to Analogue Converters Ever since its introduction, we at Audio Note have been highly critical of digital music reproduction. This dissatisfaction was the instigating force in our quest to make digital playback more dynamically realistic and less fatiguing.
DAC5 Signature Congratulations on your purchase of the Audio Note (UK) DAC5 Signature Digital to Analogue converter. It has been specifically engineered for sonic performance rather than technical specification, and fulfills all Audio Note (UK) Level 5 criteria: Pure Class A operation Zero negative feedback Single Ended circuit topology Valve rectification Materials and component quality The Audio Note DAC5 Signature is one of the most unique digital products available today.
DAC5 Signature continued… The DAC 5 Signature features an upgraded version of the M6 preamplifier line stage, using a 5814a (ECC82 / 12AU7a / 6189) and a Telefunken 6463, both of which are dual triodes valves. These are coupled to an output transformer, wound with Audio Note (UK) silver wire on a 55% Nickel Audio Note (UK) Supa-Perma C cores.
CONNECTION Special Note – Make sure that all connections are tight and clean. For best results use good quality audio interconnects. Although it is perfectly acceptable to use cables manufactured by other companies, for best results and performance, we recommend our own Audio Note (UK) range of interconnects and loudspeaker cables. For further information, please consult your nearest Audio Note (UK) dealer, or alternatively please feel free to contact us directly.
CONNECTION continued… Balanced The DAC5 Signature is equipped with custom designed and manufactured output transformers, which utilize an improved output and grounding scheme to provide the best possible connection to the pre amplifier.
CONNECTION continued… CABLE CONFIGURATION OPTIONS PRE AMP INPUT DAC5 OUTPUT 2 1 3 2 XLR FEMALE 3 SCREEN 1 XLR MALE CONVENTIONAL: SCREEN CONNECTED AT BOTH ENDS PRE AMP INPUT DAC5 OUTPUT 2 1 2 1 3 3 XLR FEMALE SCREEN XLR MALE SCREEN CONNECTED AT PREAMP END ONLY, TO ELIMINATE GROUND LOOPS PRE AMP INPUT DAC5 OUTPUT 1 2 3 XLR FEMALE SCREEN RCA MALE CABLE CONFIGURATION FOR XLR BALANCED OUTPUT TO RCA UNBALANCED INPUT When connecting the XLR / BALANCED outputs to a pre amplifier with an RC
OPERATION Once all the connections are completed and checked, ensure that the volume control on your preamplifier / integrated amplifier is at the minimum setting. Ensure that the CD Transport connected to the DAC5 Signature is switched ON. Source components should always be the FIRST components to be switched on and the LAST components to be switched off. Ensure that all pre and power amplifiers connected to the DAC5 Signature are switched OFF.
TECHNICAL SPECIFICATIONS INPUT RCA 75Ohms SPDif XLR 110 Ohms AES/EBU OUTPUT IMPEDANCE 600 Ohms, Balanced or Single Ended REFERNCE OUTPUT 3.2V RMS CHANNEL BALANCE Less than 0.2dB TUBE COMPLIMENT 1 x 5814a 1 x 6463 1 x 6X5 1 x ECL82 1 x OB2 FUSE RATINGS (5 x 20mm Time Delay type) 1.
WARRANTY INFORMATION Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed Audio Note (UK) dealer, and agrees to cover the cost of parts and associated labour required to correct such defects, subject to terms & conditions. This Warranty is offered to the first purchaser only. Any valves supplied with the unit are warranted for three months from the original date of purchase.
CONTACT INFORMATION If in the future your Audio Note (UK) product requires servicing, or if you require technical support or have any questions regarding this or any of our other products, please contact your local Audio Note (UK) dealer. Alternatively, please feel free to contact us directly: -! Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: +44 (0)1273 220 511 Fax: +44 (0)1273 731 498 e-mail: info@audionote.co.
