M Zero Level 0 line pre-amplifier Owner's Information Music's Finest Conductor
Introduction to the M Zero pre-amplifier Congratulations on your purchase of the Audio Note M Zero level 0 pre-amplifier. Audio Note Level System Level 0 denotes our entry level equipment. Do not be fooled by the low level; even though our level 0 products do not use the technological features that our higher level products are categorised by, they still use superb quality components and are designed and constructed to a very exacting standard.
Connections Line input Eachline input is suitable for connecting to any line level music source. Line level sources include CD players, radio tuners, televisions etc.Each line input consists of a pair of RCA connectors.The M Zero has 5 line inputs available. Tape loop The tape loop is available for connecting to a cassette desk. The 'tape in' connections should be connected to the cassette deck's 'line out' and the 'tape out' connections should be connected to the cassette desk's 'line in'.
Operation Once all the connections are completed and checked, make sure all power amplifiers are off and flip the mains rocker switch located on the back panel of the pre-amplifier to the 'on' position. The M Zero is a vacuum tube design and therefore requires about 45 seconds warm-up time. After this the remaining system components may now be turned on. In order to use the line inputs, select 'source' and the appropriate input.
Warranty and servicing Audio Note warrants that this product will be free from defects in materials and workmanship for one year from the original date of purchase from an appointed Audio Note dealer. The vacuum tubes are warranted for three months. In the event that your Audio Note product requires servicing, please contact your Audio Note dealer.
Specifications Weight (kg) 16 Dimensions Height (mm) Width (mm) Depth (mm) 110 218 294 Max Power Consumption (W) 11 Fuse Ratings HBC T (110/120 Vac supply) (A) HBC T (220/240 Vac supply) (A) 0.5 0.5 Input Impedance (k Ohms) 100 Gain @ 1kHz (dB) 21 Input Sensitivity (for 1V output) (mV) 92 Output Noise, Unweighted (mVrms) < 0.
Safety Information HEAT: By the nature of vacuum tubes, this product generates high levels of heat. Adequate ventilation must be provided. Do not restrict the airflow through any of the ventilation slots or place the amplifier on any surface that may restrict airflow. CAUTION: The vacuum tubes and other nearby parts operate at extremely high temperatures KEEP OUT OF REACH OF CHILDREN. HUMIDITY: Do not store or operate this unit in areas of high humidity or in close proximity to water.