User's Manual

WD752-BD-N
150Mbps Wireless Lite N USB Adapter
- 18 -
I. PBC Method
If your Access Point is equipped with a push-button for Wi-Fi Protected Setup, you can connect
the adapter to the Access Point by Push-Button Configuration (PBC) method.
Step 1 Press the WPS button on your Access Point device.
Figure 3-15 Press the WPS Button
Step 2 Click the Add WPS Profile icon on the screen as Figure 3-14.
Step 3 Select Push-Button Configuration (PBC) on the screen below.
Figure 3-16 Push-Button Configuration
Step 4 Click Start PBC.
Figure 3-17 Start PBC