User's Manual

WD752-BD-N
150Mbps Wireless Lite N USB Adapter
- 25 -
the access point with which it associates.
 Enable TX Burst - It can translate more data when it is enabled.
 Enable TCP Window Size - It can enhance the TCP throughput when it is enabled.
 Fast Roaming at - Roaming will disable when Transmit Power is below some dBm if the
function is selected.
 Apply - Click the Apply button to save the current setting.
3.1.5 About
Click the About icon on the Utility screen and you will see the following screen displaying the
wireless card and driver version information.
Figure 3-31 About
 Version - The version of the following items.
 Utility Date - The creation date of this utility.
 Driver Date - The creation date of the wireless network adapter driver.
 SDK Date – The creation date of the SDK.
 Firmware Version -The version of the adapter firmware.
 EEPROM Version - The version of this EEPROM.
 MAC Address - The MAC address of the wireless network adapter.

Note:
For more help information, you can go to website of our company.
3.1.6 An example for application
Suppose you are using an AP, the SSID is TEST and it adopts 64-bit encryption with the key
1234567890. To establish a connection with this AP, please follow these steps below:
1. Launch RL52 Wireless N Client Utility.
2. Click the Profile icon of the utility and click the Add icon on the screen that appears.
3. The Profile configuration screen will appear, please select SSID TEST from the drop-down