User's Manual

User Manual
To talk to us, call [phone] (UK Local) or 1 8773578204 (USA)
Bluetooth Music System
Bluetone 100
2
3
Plug in the Bluetone 100 to the mains power and
the LED on the front will indicate solid red
press the power button on top of the unit.
1
To enjoy Music from Bluetooth, you must first
ensure that the Minx Bluetone 100 is connected
to mains power. Then pair the Bluetone 100
with your Bluetooth enabled device.
Bluetooth
Top tips
AUX/MP3 input
Press the button on the Bluetone 100 to put your
Bluetone 100 into Bluetooth pairing mode and the LED on
front will flash blue
Enable Bluetooth connectivity on your Bluetooth device
(eg. phone, tablet, etc) and pair with the Bluetone 100
(you may need to consult your phone or tablet operating
instructions).
Once paired, music from your device will play through the
Bluetone 100 and the LED to solid Blue
Press the button again to disconnect the device.
1
2
3
4
Power buttonVolume down Volume up
AUX/MP3 Button
press to listen to the
analogue input
Bluetooth
press to listen to Bluetooth
AUX
MP3
Bluetone 100 Bluetooth Music System
Adjust the bass of your Bluetone 100 to your
listening environment.
Auto power down
Min Max
Bluetone 100 Bluetooth Music System
Standby
MP3 input selected
AUX input selected
BT pairing mode
BT input selected
Bass control
LED Indication
To save power, The unit will switch to
standby 8 hours after the last user
input. PS: The timer will be reloaded
with the stored value whenever the
unit receives a command from the
following sources:Bass Control;Volume
Control;Source selection (by Bluetooth
stream; MP3 or Aux source select)
Press MP3 or AUX button to select the analogue input
and stop the playback of Bluetooth - the LED will trun to
solid cyan (MP3) or solid orange (AUX)