User manual

To get a full paging mic functionality you can

connect the microphones with a DIN-Jack.

Therefore you can use the pins 1-3 for the MIC

and pins 4-5 to switch on the PRIORITY for that

respective microphone input.

The difference between the priority caused by DIN-

jack and the priority by XLR-jack with priority (12V

DC) is, that in DIN case the respective microphone

gets the main priority and is not influenced by other

microphones. All other microphones are muted.

DIN-INPUT

1: HOT

2: SCREEN

3: COLD

4: Priority 12V DC

5: GND

Device Functions

- Rear side -

ic audio

Microphone input 1-4 wit DIN-Jack

D 24

O I

YPRI R

PUT