Specifications

HOUSE CODE 2
HOUSE CODE 3
HOUSE CODE 1
Note:
1. Set to same House Code on both transmitter and loudspeaker to make wireless connection.
2. You can add as many LV-speakers as you want in each House Code, within range of transmitter.
3. House Codes are the same for all speakers in the Living-series.
You can use Living LV1, LV2, LV3 or LV-SUB in the same wireless network.
SETTING CHANNEL (HOUSE CODE):
MULTIROOM
CHANNELS, PLAY FROM DIFFERENT SOURCES AT THE SAME TIME
By House Codes (1, 2, 3), the audio network can be divided in up to three separate channels. This
feature allows you to play different music from different sound sources (with 3 transmitters).
You can play all channels at the same time to different LV speakers in your home.
House Code switch on side of transmitter TX100.
Set to same number as the speakers you want to play wirelessly to.
House Code button on front of LV1.
One push to display current channel.
Change House Code by pushing again. 1, 2, 3 and back to 1.
House Code number is displayed.
When channel is selected, display will turn black after 3 seconds.
Reset speaker to factory settings: Hold House Code button on speaker pressed while pushing VOL + button.