Owner`s manual

19
Monitor/TV
How to Connect for Zone B
The MX136 is a Dual Zone A/V Control Center. For Zone
B activation, a Power Amplifier and Loudspeakers are re-
quired and the addition of a McIntosh Sensor or Keypad
allows for more convenient operation. To provide the best
video quality for Zone B, it is important to use high quality
cables and keep the cable lengths as short as possible. If S-
Video Connections are used, make sure the cable’s signal
carrying wires are individually shielded.
Note: If Zone B will not be connected at this time, proceed to
step 5.
1. Connect a cable from the MX136 POWER CONTROL
B Jack to the McIntosh Power Amplifier Power Control
In Jack.
2. Connect a cable from the MX136 ZONE B OUTPUTS
Left and Right to the McIntosh Power Amplifier Unbal-
anced Left and Right Inputs.
McIntosh Keypad
McIntosh Power Amplifier
Left
Loudspeaker
Right
Loudspeaker
3. Connect a cable from the MX136 KEYPADS ZONE B
to the McIntosh Keypad.
4. Connect a cable from the MX136 MON B S-Video
Socket to the Monitor/TV video input.
5. Connect the MX136 to a live AC Outlet.
How to Connect for Zone B
To AC
Outlet