Owner`s manual

35
Surround Mode
By default, the MX136 will remember the last Surround
Mode Setting for each input. It is also possible to assign a
Default Surround Mode for each Input, so every time that
Input is selected the Surround Mode will be the default set-
ting instead of the last selected Surround Mode for the in-
put. Refer to figure 20.
25. Using the Up or Down directional Push-buttons,
select SURR MODE from the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
Push-buttons to select the CINEMA 1 Surround
Mode for DVD Input instead of the default setting of
LAST.
26. Continue next to the VIDEO POWER Control. If you
do not wish to perform VIDEO POWER Control Ad-
justments at this time, proceed to the HDMI Video
Input.
Video Power
The MX136 has a VIDEO POWER CONTROL Jack and
its activation is controllable by selecting any one of the
Analog Audio/Video Inputs. By default all eleven Analog
Audio/Video Inputs have the VIDEO POWER feature set to
the ON Position. In the following example, the VIDEO
POWER Settting for the new DVD Input will be switched
Off.
27. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right direc-
tional push-buttons to select the DVD Input Number
5.
28. Using the Up or Down directional push-buttons,
select VIDEO POWER on the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
push-buttons to select OFF. Refer to figure 21.
29. If you do not wish to perform HDMI VIDEO Input
Adjustments at this time, proceed to Component
Video and Video Converter Input.
HDMI Video Input
The MX136 has Electronic Input Switching for four HDMI
Video Sources and they may be assigned to any of the
eleven Analog Audio/Digital Inputs. The following example
describes how to reassign HDMI 2 IN Video Input, which
by default has been assigned to TV Input 7, over to the CD2
Input 3.
Notes: The MX136 allows for assigning a HDMI Video Input
to multiple Inputs or switched Off. If there are any
Component Video, S-Video or Composite Video Inputs
to be viewed through the HDMI Video Monitor A
Output, it is necessary to select “COMP” in the HDMI
Video Menu Selection for that Input Source.
30. Using the Up or Down directional push-buttons,
SETUP, con’t
Figure 19
MENU: INPUT SETUP
SOURCE INPUT 1 - IR-PH/AUX
TITLE PHON
DIGITAL INPUT OPT C LK
ÆZONE A ANALOG INPUT PHON
SURR MODE LAST
VIDEO POWER ON
HDMI VIDEO NONE
COMPONENT VIDEO NONE
MAIN MENU
Figure 20
MENU: INPUT SETUP
SOURCE INPUT 11 - IR-DVD
TITLE DVD
DIGITAL INPUT COAX F LK
ZONE A ANALOG INPUT RCA
ÆSURR MODE CINEMA 1
VIDEO POWER ON
HDMI VIDEO NONE
COMPONENT VIDEO NONE
MAIN MENU
Figure 21
MENU: INPUT SETUP
SOURCE INPUT 11 - IR-DVD
TITLE DVD
DIGITAL INPUT COAX F LK
ZONE A ANALOG INPUT RCA
SURR MODE CINEMA 1
ÆVIDEO POWER ON
HDMI VIDEO NONE
COMPONENT VIDEO NONE
MAIN MENU