Owner`s manual

37
SETUP, con’t
Menu, followed by pressing the Left or Right di-
rectional push-buttons to select S-VID. Use the Up
or Down directional push-buttons to select HDMI
VIDEO on the On-Screen Menu, followed by press-
ing the Left or Right directional push-buttons to
select COMP Refer to figure 23.
41. Using the Up or Down directional push-buttons,
select MAIN MENU on the On-Screen Menu and
press the SELECT/OK Push-button.
42. Continue next to the VOLUME SETUP on page 38.
If you do not wish to perform VOLUME SETUP Ad-
justments at this time, select MAIN MENU from the
menu. The MAIN SYSTEM SETUP Menu will reap-
pear on the Monitor/TV screen and proceed to the
next step.
43. Select EXIT from the MAIN SYSTEM SETUP
Menu. If you are satisfied with the changes that you
may have made, select YES to save those changes or
NO not to save them. The MX136 will then return to
normal
opera-
tion. Re-
fer to
figure 7
on page
27.
Number Title Default Setting New Setting Default Setting New Setting Default Setting New Setting
0 TUNER ON - -
1 PH/AUX ON - -
2CD1 ON - -
3CD2 ON - -
4 TAPE1 ON - -
5 TAPE2 ON - -
6 SAT ON 1 1
7TV ON 2 2
8LV ON - -
9 VCR1 ON 3 3
10 VCR2 ON 4 -
11 DVD ON 5 4
Video Inputs Source Settings
Video Power Control Component Video Source HDMI Video Source
Number Default Title New Title Default Input New Input
0TUNER -
1 PH/AUX -
2 CD1 A-Optical
3 CD2 D-Coaxial
4TAPE1 -
5TAPE2 -
6 SAT B-Optical
7TV E-Coaxial
8LV C-Optical
9 VCR1 -
10 VCR2
-
11 DVD
F-Coaxial
Analog and Digital Audio Input Source Settings
Digital Input
Figure 23
MENU: INPUT SETUP
SOURCE INPUT 8 - IR-LV
TITLE LV
DIGITAL INPUT OPT C LK
ZONE A ANALOG INPUT RCA
SURR MODE CINEMA 1
VIDEO POWER OFF
HDMI VIDEO COMP
ÆCOMPONENT VIDEO S-VID
MAIN MENU
Figure 22C
MENU: INPUT SETUP
SOURCE INPUT 5 - IR-TP2
TITLE DVD2
DIGITAL INPUT OPT C LK
ZONE A ANALOG INPUT RCA
SURR MODE CINEMA 1
VIDEO POWER OFF
ÆHDMI VIDEO COMP
COMPONENT VIDEO 4
MAIN MENU