Owner`s manual

45
2. Rotate the TRIM LEVEL Control clockwise until the
number 10 appears to the right of BASS TRIM on the
Front Panel Alphanumeric Display. This is an example
of increasing the Bass response by 10dB.
3. Rotate the TRIM SELECT Control clockwise until
TREB TRIM appears on the Front Panel Alphanumeric
Display. Refer to figure 42.
4. Rotate the TRIM LEVEL Control clockwise until the
number 11 appears to the right of TREB on the Front
Panel Alphanumeric Display. This is an example of in-
creasing the Treble response by 11dB.
Effects
The MX136’s Trim Select Effect Mode allows for different
types of audio signal processing as different Surround
Modes are selected. Refer to the chart below:
If the STEREO MODE, CINEMA 1 or 2, or EXTER-
NAL Surround Modes are selected the Trim Select Effect
Mode provides variable Loudness Compensation.
Figure 41
Figure 42
Figure 43
When the MUSIC 1 Surround Mode is selected and a
two channel audio signal is processed in the Dolby Pro
Logic IIx Mode, the Trim Select Effect Mode provides vari-
able Center Channel Width Adjustment. Likewise, with the
MUSIC 2 Surround Mode selected and a two channel audio
signal is processed in the DTS NEO:6 Mode, the Trim Se-
lect Effect Mode also provides variable Center Channel
Width Adjustment.
If MUSIC 3 or 4 Surround Modes are selected the Trim
Select Effect Mode provides variable Reverberation of the
sound going to the Surround Loudspeakers.
Loudness
The Loudness Control Function automatically increases
bass response as the volume level is lowered for improved
listening at softer volume levels. The amount of Loudness
Boost is adjustable in 10% increments from 10% to 100%.
The maximum Loudness boost is 18dB, less any bass boost
that may have been previously set by the Bass Trim func-
tion. For example if the Bass is boosted 10dB, the maxi-
mum additional Loudness boost will be 18dB less 10dB or
8dB. Refer to figure 43.
1. Rotate the TRIM SELECT Control clockwise to the
EFFECT position. The word TRIMLOUD will appear
on the Front Panel Alphanumeric Display.
2. Rotate the TRIM LEVEL Control clockwise until the
desired percent of Loudness is indicated to the right of
TRIMLOUD on the Front Panel Alphanumeric Display.
How to Operate the Trim Mode
Surround Mode Effect Sound Type
Stereo Loudness Compensation
Cinema 1 Loudness Compensation
Cinema 2 Loudness Compensation
External Loudness Compensation
Music 1* Center Width
Music 2**
Center Width
Music 4 Sound Stage Variations
Trim Effect Mode
*when a two channel signal is processed in the
aDolby Pro Logic IIx Mode
**when a two channel signal is processed in the
aaDTS NEO:6 Mode