Specifications

ENGLISH
OVERVIEW AND CONTENTS
2 x Living LV3 loudspeakers
IR receiver for
remote
Display
Rear panel
LED, steady blue for estab-
lished wireless connection.
Flashing blue if wireless
connection is lost.
Red for no wireless
connection or no
transmission.
Volume control
House Code and Zone
buttons
Remote
On/Off
Mute
Shows selected
zone in display.
A, B, C
Shows selected
House Code in
display. 1, 2, 3
Master volume
Zone volume
1 x TX100 wireless transmitter
To 230V AC outlet
Switch for Left,
Mono, Right
Main power
SPECIFICATIONS
Type:
Powered wireless loudspeaker system
with DSP, 3-way bass reflex
Amplifier:
100W + 35W + 35W digital Class D,
Tweeter: 3 x 1” silk dome
Midrange: 4.5”
Woofer: 6.5”
Frequency range:
30 – 24.000Hz
Crossover frequency:
300/3000Hz (24/24dB/octave L/R)
Dimensions HxWxD:
750x220x220 mm
FEATURES
- Built-in wireless receiver in each speaker
- Wireless full CD quality sound
- Wireless range room to room: Up to 20 meters
- Wireless range same room: Up to 50 meters
- Wireless range open field: Up to 100 meters
- No interference or delays
- Works with both Mac and PC
- RF band: 2.4GHz
- Sample rate: 48 KHz
- Dedicated proprietary protocol
- Room adaptation
House Code switch
LED, blue for established wireless connection.
Red for no wireless connection.
3.5mm stereo jack line in*
*Using the 3.5mm jack you can send wireless audio from units with
line/headphones output. (For example iPod, receiver, etc) TX100 will
need an aftermarket USB power supply in a setup using 3.5 mm jack.