Owner`s manual
Specifications
OUTPUTS, ANALOG: (Stereo)
1. Balanced XLR 5.4V RMS (+14.6dBv) max.
2. Single-Ended RCA 2.7V RMS (+8.6dBv) max.
OUTPUT IMPEDANCE: (Analog)
400 ohms BAL, 200 ohms SE.
FREQUENCY RESPONSE:
0.5–20,000Hz +0 -1dB.
SIGNAL TO NOISE RATIO: 90dBA
DISTORTION: .025% 1kHz
RESOLUTION: 24 BIT DELTA-SIGMA DAC.
CHANNEL SEPARATION: 92dB 1kHz.
OUTPUTS, DIGITAL: (to external Digital-to-Analog Converter)
1. XLR Balanced AES/EBU 110-ohm 4V P-P.
2. BNC coax SPDIF 75-ohm 0.7V P-P.
SIGNAL FORMAT (disc):
Sampling frequency: 44.1kHz.
Quantization Bit: 16bit linear per channel.
Channel bit rate: 4.3218Mb/sec.
Channel modulation code: EFM (8 –14 modulation).
Error correction: CIRC (cross interleave Reed
Solomon Code).
DRIVE MECHANISM (top load):
Wow & Flutter: Unmeasureable (Quartz stability).
Discs: Accepts 5" (12cm) and 3" (8cm) sizes.
OPTICAL PICKUP:
Type: 3-beam LDGU (Laser Diode & Grating Unit), with
holographic diffraction light pen.
Laser: GaAIAs semiconductor, 780nm, 0.5mW maximum
output.
Servo: Digitally-controlled low-inertia linear positioning
actuator.
JITTER REDUCTION: High-stabillity crystal-controlled
re-clocking for all outputs.
DISPLAY: Six-digit vacuum fluorescent, with optical filter.
POWER REQUIREMENTS (detachable power cord):
100 -135VAC 60Hz (200-270VAC 50/60Hz), 40 watts
maximum. (26 watts standby)
COMPLIANCE: RF Interference complies with FCC and CE
MARK.
FRONT PANEL CONTROL FUNCTIONS:
STANDBY O operate/standby mode
PAUSE II program
STOP ■ disc
PLAY
l
disc
PREV
|
n
selection
NEXT
l|
selection
INFRARED REMOTE CONTROLFUNCTIONS:
(Standard RC5 code, 30ft max distance)
0–9 digit entry keys
SCAN ten seconds each track
PAUSE program
REP track/disc
STOP program
PLAY disc
SHUF random sequence play
|nn
search, REV
ll|
search, FWD
STBY operate/standby mode
PROG enters selection on program list
TIME elapsed, remaining track; remaining disc
A/B repeats segment
|n
previous track
l|
next track
DIMENSIONS : 19" (48 cm) W x 5
1
/
4
" (13.4 cm) H x 12
1
/
4
"
(31.1 cm) D. Handles extend 1
1
/
2
" (3.8 cm) forward of the front
panel. Rear connectors extend
3
/
4
" (1.9 cm).
WEIGHT: 25 lbs. 11.4 kg) Net; 35 lbs. (15.9 kg) Shipping.
Specifications subject to change without notice.
Model CD3









