User guide
11
Operation
Remote Control Functions
The remote control unit includes all of the above described CD6 front panel
control functions plus the following additional functions. (Functions in [ ]
indicate labeling abbreviations appearing on remote control unit.)
0-9 BUTTONS: Pressing numbered button(s) corresponding to the disc
track number will advance disc to desired track. Also used to select tracks
when compiling a custom disc playback program (see PROGRAM function
description below).
SCAN: With a stopped CD and the CD door closed, press SCAN and the
rst 10 seconds of each track will be played in sequence. (“SCAN” will light
up on display, then 10 seconds are counted out next to each track number.)
To hear a track in full that the player is presently scanning, press SCAN
button again which will cancel SCAN function.
SHUFFLE [SHUF]: Toggles between Shue play (random playback order)
and normal play (sequential playback). SHUFFLE appears in the display
window when random playback is selected.
REPEAT [REP]: Press REPEAT once to repeat the entire disc continuously
(“REPEAT” appears in display window). Press REPEAT once more to
continuously repeat the track now playing (“REPEAT 1” appears in display
window). Press REPEAT once again to discontinue repeat mode.
UPSAMPLE: Select between native sampling rate playback and integer
upsampling. 44.1 kHz and 88.2 kHz sampling frequencies are upsampled
to 176.4 kHz, whereas 48 kHz and 96 kHz frequencies are upsampled to
192 kHz. An LED will indicate which sampling frequency is selected. Note:
When using the USB input, upsampling is available only to 88.2 kHz or 96
kHz.
FILTER: Select between Fast and Slow digital lters. Pressing FILTER will
toggle between the two options, and will be indicated by an LED next to the
selected lter name.