User guide
12
Operation
Remote Control Functions continued
INPUT: Select between CD playback and the digital inputs on the rear
panel (2 Toslink, USB, RCA). Pressing INPUT toggles through the dierent
inputs, and the selected input will be indicated by an LED next to the input
name. Note: display window is illuminated only during CD playback.
PROGRAM [PROG]: Allows compiling a custom track selection and
playback order of up to 20 tracks on a disc. With the player in STOP
mode, enter the desired rst track number and then press the PROGRAM
button. The word “PROGRAM” will light and the display will show the total
number of tracks programmed and total programmed time. If a second
track selection is entered, the word “PROGRAM” ashes, indicating that
other track(s) have already been stored in the program memory. Press the
PROGRAM button to save the second track selection. Repeat procedure
to program additional tracks as desired. This programming procedure, with
readout of the cumulative total number of programmed tracks and total
programming time (including time between tracks), works for any of the rst
13 numbered tracks on a disc. You may program track numbers higher
than 13, but from then on no track time information will appear on the
display. To preview a program before playing it, press PLAY and then use
the NEXT and PREV buttons to cycle through track selections. Pressing
PLAY will begin playing program. Pressing STOP once will stop program
play. Pressing PLAY again will resume play from beginning of program. To
cancel program, press STOP twice.
TIME: Pressing and releasing TIME repeatedly will cycle through the
following information on the display: current track time elapsed (default
setting initially seen on display), total disc time elapsed, and total disc time
remaining.
DISPLAY DOWN/DISPLAY UP [DSPDN/DSPUP]: Decreases/Increases
display intensity, oering four levels of brightness as well as display o.