User guide

13
Operation
Remote Control Functions continued
A/B: Press the A/B button once while music is playing, then press it again;
the musical passage in the interval between pressing the button is then
repeated in a loop until pressing the A/B button once again to discontinue
it. Display reads “A—B” to show activation. Note: you must discontinue
the A/B loop before pressing PLAY to resume normal playback. Pressing
and holding this button down will fast search backward through the track
that is playing until it is released. Rate of search accelerates as button is
held down.
CD Door Functions/Warnings
Do not attempt to play a CD without rst installing the supplied CD6
magnetic disc clamp on the CD. Use only the supplied CD6 clamp in your
CD6 player.
CD door must be fully closed for the CD6 to operate.
If the CD door is closed without a CD in the player and the CD6 is powered
up, the display will read “NO DISC”.
If a CD is inserted (label side up) in the CD6, the CD door is fully closed and
the CD6 is powered up, the CD will spin for a few seconds while the track
information is accessed. The number of tracks and total disc time will then
be displayed, indicating the CD is ready to play.
Keep the CD door closed when the CD6 is turned o and not in use to keep
dust out of the lens and drive area.
When the CD6 power is on, keep the CD door fully closed (except to change
CDs) to to prevent dust from collecting on the tray and lens.