User guide
25
Maintenance
Servicing
CAUTION: Your CD6 contains sucient levels of voltage and current to be
lethal. Do not tamper with a component or parts inside the unit. Refer any
needed service to your authorized Audio Research dealer or other qualied
technician. Should service be necessary, please contact your Audio
Research dealer, or Audio Research Customer Service (763) 577-9700.
about fuse replacement
The CD6 has two fuses; both are located towards the back of the chassis
on the left. One fuse is accessible with the removal of the top cover, and
the other with the removal of the bottom panel. See specications for
information on fuse types.
Cleaning
To maintain the visual appearance of your CD6, occasionally wipe the front
panel and top cover surfaces with a soft damp (not wet) cloth to remove
dust. A mild, non-alkaline soap solution may be used to remove ngerprints
or similar smudges. Cleaners containing abrasives should not be used as
they will damage the brushed grain of the front panel nish, as well as the
LED display window. A dry 2-inch pure bristle paint brush works well to
remove dust from bevels, reliefs and switches. The CD6 CD compartment
may be gently dusted: carefully avoid touching the laser assembly area to
prevent possible damage.
Disposal and Recycling Guidelines
To dispose of this electronic product, do not place in landll. In accordance
with the European Union Waste Electrical and Electronic Equipment (WEEE)
directive eective August 2005, this product may contain regulated materials
which upon disposal require special reuse and recycling processing.
Please contact your dealer or importing distributor for instructions on
proper disposal of this product in your country. Or, contact Audio Research
Corporation (763-577-9700) for the name of your importing distributor and
how to contact them. Packing and shipping materials may be disposed of
in a normal manner.