User guide
5
Warnings
To prevent re, or shock hazard, do not expose your CD6 to rain or moisture.
This unit contains voltages which can cause serious injury or death. Do
not operate with cover removed. Refer servicing to your authorized Audio
Research dealer or other qualied personnel.
The detachable power cord on your CD6 is equipped with a heavy gauge,
3-conductor cable and a standard three-prong grounding plug. For absolute
protection, do not defeat the ground power plug. This provides power line
grounding of the CD6 chassis to provide absolute protection from electrical
shock.
For continued protection against re hazard, replace the fuse only with the
same type and rating as specied at the fuse holder.
Do not operate the CD6 player without the supplied CD6 clamp installed
on the CD. Gently place clamp on disc to prevent damaging the spindle
mechanism.
Whenever the CD6 power is on, the door covering the drive mechanism/
tray area should remain fully closed after inserting or removing a CD.
Following this procedure will maintain proper ventilation and also minimize
dust intrusion on the lens and drive mechanism.
The appliance coupler at the rear of this unit must be accessible for
emergency power disconnect.
A note about packaging...
Save all packaging in a dry place away from re hazard. Your CD6 compact
disc player is a precision electronic instrument and should be properly
cartoned any time shipment is made. You may not have occasion to return
your unit to the factory for service, but if that should prove necessary, or
other occasion requiring shipment occurs, the original packaging will protect
your CD6 from unnecessary damage or delay.