User guide
6
Installation
In your System
While the CD6 does not dissipate an unusual amount of heat, it is important
that it be provided with reasonable airow to assure long, trouble-free
operation. In addition, the following installation guidelines will help insure
maximum sonic performance as well as reliable service.
Upright and level horizontal mounting is mandatory, preferably on solid,
non-resonant shelving. Allow sucient space for convection cooling. Do
not block the ventilation holes when the unit is turned on.
Do not stack the CD6 on top of another component: not only could this
cause overheating, but hum may be introduced into the system.
Do not place any objects on top of the CD6; its suspension feet are tuned
for the specic weight of the CD6.
Do not place or operate your CD6 on a soft or irregular surface such as a
rug. This can prevent proper leveling and restrict ventilation.
Do not operate your CD6 without the top and bottom covers installed.
These are required both for safety as well as shielding from interference.
If side-by-side mounting with other equipment is employed, place the CD6
to the left of the other chassis, so as to provide maximum spacing between
the transformers of the CD6 and the other component.