Contents Model DSi200 Section Page No. Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Accessories . . . . . . . . . . . . . . . . . . . . . . . .
Model DSi200 D E F I N I T I O N S E R I E S DISPLAY VOLUME INPUT POWER INT EGRA TED AMPLI FIER MONO INVERT MUTE D S I 2 0 0 HIGH D EFINITION ® LEFT INPUTS RIGHT INPUTS MODEL DSI200 INTEGRATED AMPLIFIER BAL 1 BAL 2 CD PLYMOUTH, MINNESOTA MADE IN U. S. A. TUNER AUX /PROC AUX/PROC TUNER RIGHT OUTPUT WARNING! RISK OF HAZARDOUS ENERGY! MAKE PROPER SPEAKER CONNECTIONS SEE OWNERS MANUAL CD BAL 2 BAL 1 LEFT OUTPUT + - MAX POWER CONSUMPTION 815 W 50/60 HZ ˜ 6A FUSE SLO-BLO (T3.
Model DSi200 Preface Volume Please take time to carefully read and understand the following instructions before you install or attempt to operate your Audio Research DSi200 integrated preamplifier. Becoming familiar with the product and its correct operating procedures will help assure you of maximum musical enjoyment and reliable operation. The effort you invest now will be well rewarded in the years ahead.
Model DSi200 PROCESSOR (PROC): The Aux/Proc input may be used as a normal input for a line-level source, or it may be used as a fixed level pass-through for use with a home theater processor. When the Processor button on the remote control is engaged, “PROCESSOR” will appear on the display, the volume will not be adjustable, and the gain will be fixed at 26dB (typical of a separate amplifier).
Model DSi200 14-gauge and have a standard grounding plug properly installed. These power cords are to be used with caution, at the sole risk of the owner. Installation The amplifier may be installed in a ventilated cabinet; observe the following guidelines to maximize the performance and service of your amplifier. With proper installation, the DSi200 may be left on continuously for maximum performance on demand; it will draw 38 watts of AC power at idle.
Model DSi200 Servicing Limited Warranty Because of its careful design and exacting standards of manufacture, your DSi200 should require no routine maintenance. The remote control's batteries (AAA) should be replaced once a year. Audio Research Corporation products are covered by a 3Year Limited Warranty, or a 90-Day Limited Warranty (vacuum tubes).
Model DSi200 Specifications POWER OUTPUT: 200 watts per channel into 8 ohms, 1% THD; 300 watts per channel into 4 ohms, both channels driven. FREQUENCY RESPONSE: (-3dB points at 1 watt) 5Hz to 55 kHz. INPUT SENSITIVITY: 0.93V RMS for rated output (32.7dB Gain) single-ended or balanced. INPUT IMPEDANCE: 60K ohms single-ended, 120K ohms balanced differential. INPUTS: (5): BAL 1, BAL 2, CD(SE), Tuner (SE), Aux (SE). MAXIMUM INPUT: 20V RMS BALANCED, 10V RMS SE.