User guide

13
Operation
Volume
The large green number in the top right corner shows the master volume.
The volume range is from 0-103. Set volume levels can be programmed
so that when the SP20 is initially powered on, the volume is always
at the same number. Likewise, individual set volumes for the speaker
(main) outputs and headphone output can be set to prevent unexpected
volumes while switching between outputs. See ‘Volume Presets’ in the
settings menu for further instructions on setting output levels.
3
Stereo/Mono
Select between stereo and mono (summed L and R channel) playback.
This feature is useful when listening to recordings which were originally
recorded in mono sound. To switch between stereo and mono, touch
the box on the screen.
4
Phase Normal/Invert
Select between normal (non-inverted) and inverted phase. This feature
can be used in the event a recording is inverted phase. To switch
between normal and inverted, touch the box on the screen.
5
Load
Select the appropriate impedance for a turntable cartridge (phono input
only). Load options include 50, 100, 500, 1000, and 47k Ohms. To
toggle through the impedance options, touch the box on the screen.
6
Mute
Indicates when Mute is engaged. Pressing the right button under the left
rotary knob will toggle between mute and operate.
7
Monitor
Indicates when the Monitor input is selected. To select the monitor
input, touch anywhere in the input name area of the screen, or push the
monitor button on the remote.
2