AT-LP60XBT-USB User Manual Automatic Wireless Turntable AT-LP60XBT-USB
Introduction Thank you for purchasing this Audio-Technica product. Read through this user manual before using the product to ensure its correct use. Also, keep this manual for future reference. This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the product are correct for the country you live in. Package contents Make sure that you have all the included items listed below before using this product.
Safety precautions RF Exposure Statement: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
Notes on use Turntable body • • • • Do not set and use the product in locations that are considerably hot or humid, dirty, or subject to extreme vibrations. The product should be positioned on a flat, level surface. When closing the dust cover, close it completely. Do not open the dust cover during playback. Read the user manual for the Bluetooth receiver device. Cartridge • • • Attach the provided protector to the cartridge when the product is not in use.
Part names and functions 7 7 1 2 8 9 3 10 4 5 6 11 12 AT-LP60XBT-USB 13 AT-LP60XBT-USB 14 15 16 17 18 19 20 12 Dust cover 1 45 RPM adapter (shown in receptacle) Adapts 7" records with large center holes to fit center spindle. 13 Platter speed button Select the platter speed (33-1/3 or 45 RPM). 2 Platter 14 START button Spins the platter and moves the tonearm. 3 Spindle 15 STOP button Returns the tonearm to its original position and stops the platter.
Preparation for use 2. Place the belt on the motor pulley (brass-colored). Installing the turntable • • • • • Mount the product on a level surface. To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers. The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from radios. If the product is near equipment (cell phone, etc.) that emits strong radio waves, noise may occur.
Preparation for use Rotating the platter Wireless/wired connection You can connect to a speaker, etc. via Bluetooth technology or RCA audio cable. When using Bluetooth, refer to “Connecting via Bluetooth wireless technology” on p. 7. 1. Using your hands, rotate the platter ten times. • • Remove the tie that locks the tonearm and press the tonearm lift button to lift the tonearm. Slowly rotate the turntable ten times by hand in the direction of the arrow.
Preparation for use 3. When pairing is complete, the indicator LED lights in blue. Connecting via Bluetooth wireless technology The product supports Bluetooth wireless connection. It can be connected with Bluetooth-compatible headphones, active speakers and wireless stereo speakers (hereinafter referred to as Bluetooth receiver devices). Blue About pairing When connecting a new Bluetooth receiver device, you need to pair it with the product.
Preparation for use Setting pre-amplifier selector switch Connecting the device This product has a built-in phono equalizer function. You can use the product even if you do not have a phono amplifier or connectable equipment with a built-in phono amplifier. Use the pre-amplifier selector switch to set the output, as shown below.
Preparation for use Playing a record Connecting to computers with USB input • • Automatic operation The included USB cable connects the product to your computer without need for special drivers. Audacity (refer to http://www.audacityteam.org for details) and other compatible third-party recording software packages are available, allowing you to record from the product to your computer. Lower the volume of the amplifier, speakers, etc. sufficiently. 1. Select the size with the size selector.
Playing a record Manual operation Pausing the record Lower the volume of the amplifier, speakers, etc. sufficiently. 1. After lowering the volume of the amplifier, speakers, etc. sufficiently, press the tonearm lift button to lift the tonearm. 1. Press the tonearm lift button. • When you press the tonearm lift button, the tonearm rises from the tonearm rest. Stopping the record Once the record has played to the end, the tonearm will automatically return to the tonearm rest.
Playing a record Care How to use with Bluetooth connection • • • Turntable body To connect for the first time, pair the product and your device via Bluetooth wireless technology. Read the user manual for the Bluetooth receiver device. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices. • • • 1. Turn on the Bluetooth receiver device.
Replacing the stylus Replacing the belt • Removing the stylus • • • • In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip wears down. As a rule of thumb, replace the stylus after 400 hours of use. Be sure to disconnect the product’s AC adapter from the outlet. When replacing the stylus, hold the headshell and the cartridge body tightly. • The belt is a consumable part.
Replacing the belt When the turntable is moved 5. Place the belt on the motor pulley (brass-colored). Using the product's original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If you do not have the packaging materials, take the following measures: • Grasp the belt that was attached in step 3 and, while pulling it, place it on the brass motor pulley. • Motor pulley (brass-colored) • • • Place the belt 6. Set the felt mat on the platter. 7.
Troubleshooting Problem Solution The platter does not spin. • Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet. • Has the belt slipped from the platter? Correctly place the belt on the platter. • Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley (brass-colored) correctly. • Has the belt been damaged? Replace it with a new belt. • Are the function settings and input for connected equipment (amplifier, etc.
Dimensions AT-LP60XBT-USB 373.3 97.5 359.
Specifications Communication specifications Communication system Bluetooth version 5.0 Maximum RF output 10 mW EIRP Maximum communication range Line of sight - approx. 10 m (33') Frequency band Turntable Type Belt-drive, fully automatic operation Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM 2.402 GHz to 2.480 GHz Turntable platter Aluminum Modulation method FHSS Wow and flutter < 0.