User's Manual

10
Playing a record
Manual operation
Lower the volume of the amplifier, speakers, etc. sufficiently.
1. Press the tonearm lift button.
•
When you press the tonearm lift button, the tonearm rises
from the tonearm rest.
2. Position the tonearm over the desired location (groove) on
the record.
3. Press the tonearm lift button.
•
When you press the tonearm lift button, the tonearm
descends slowly onto the record and play begins.
Pausing the record
1. After lowering the volume of the amplifier, speakers,
etc. sufficiently, press the tonearm lift button to lift the
tonearm.
Stopping the record
Once the record has played to the end, the tonearm will
automatically return to the tonearm rest.
To manually stop the record, do the following.
1. Lower the volume of the amplifier, speakers, etc. sufficiently.
2. Press the STOP button.
•
Once the record stops playing, the tonearm automatically
returns to the tonearm rest.
3. Remove the record after the platter has come to a
complete stop.
•
When the tonearm reaches the end (center) of the record, it will
automatically lift and return to the tonearm rest. Do not interfere
with its motion. Doing so can cause the product to malfunction.
If the tonearm does not lift and return to the tonearm rest, press
the STOP button to complete this operation.
•
If the felt mat gets dirty, it can easily scratch the record, so
remove the felt mat periodically and wipe off any dust.
•
To prevent the record from scratches and warping, remove it
after use.
•
Do not use a disk stabilizer.
•
Do not use a platter other than the one provided.
•
This product is not intended for DJs. Do not touch the record or
the platter while the record is playing.
AT-LP60XBT-USB
AT-LP60XBT-USB