User Manual

10
Using the product
Reset function
If the product does not work or other malfunctions occur, refer to
“Charging the battery” (p.5) and connect the USB charging
cable that is carrying power, and then reset the product.
Disconnecting and then reconnecting the USB charging cable
should resolve any problem you are experiencing. If the problem
persists, please contact your local Audio-Technica dealer.
Resetting does not change any of your settings (pairing information,
volume setting, etc.).
Talking on the phone
• If your Bluetooth device supports telephone features, you can use the product to talk on the phone.
• When your Bluetooth device receives a phone call, the product sounds a ring tone.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.*
1
When
Operation Function
Receiving
a call
Press the control button. Answers the call.
Press and hold the control button (for about
2 seconds).
Rejects the call.
Talking on
a call
Press the control button. Ends the call.
Press and hold the control button (for about
2 seconds).
Each time you press and hold the button (about 2 seconds),
you switch the call to your mobile phone or to the product.*
2
Press a volume button (+ or -). Adjusts the volume (+ or -) of the call.
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear a confirmation tone, release the control button.
• The phone call controls explained above may not be available on some smartphones.
Auto power o function
The product automatically turns off after 5 minutes of not being connected to a device.