ATH-SR30BT User Manual Wireless Headphones
Introduction Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you will use the product correctly. Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Safety precautions Cautions for rechargeable battery The product is equipped with a rechargeable battery (lithium polymer battery). • If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately. • If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks, contact your local Audio-Technica dealer.
Notes on use • Be sure to read the connected device’s user manual before use. • Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. • On public transportation or in other public places, keep the volume low so as not to disturb other people. • Minimize the volume on your device before connecting the product. • When using the product in a dry environment, you may feel a tingling sensation in your ears.
Part names and functions Headband Slider Joint Arm L/R (left/right) indicator Housing A microphone is built into the L (left) side housing. Earpad Power switch Battery jack Control button Turns the power on and off. Use to connect the included USB charging cable and charge the product. Use to play/pause music and answer/end phone calls. ■■Accessory Indicator lamp Volume buttons Displays the operating status and battery level of the product. Adjust the volume using + and –.
Charging the battery • Fully charge the battery when using for the first time. • When the rechargeable battery is running low, the product will beep through the headphones, and an indicator lamp will flash in red 3 times every 4 minutes. In this case, charge the battery. • It takes about 4 hours maximum to charge the battery fully. (This time may vary depending on usage conditions.) • While charging the battery, the product's Bluetooth connection remains disabled and therefore the product cannot be used. 1.
Connecting via Bluetooth wireless technology To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Pairing a Bluetooth device • Read the user manual for the Bluetooth device. • Place the device within 1 m (3.3') of the product to perform pairing correctly. • To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the confirmation tone. 1.
Using the product The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices.
Using the product Compact folding You can fold the housing into the inner side of the headband using the joints at the fulcrum. • Be careful so as not to get your fingers caught in the joints. • When using the product, make sure to return the housing to the original position. Joint Fold Listening to audio • To connect for the first time, pair the product and your device via Bluetooth wireless technology.
Using the product Talking on the phone • If your Bluetooth device supports telephone features, you can use the microphone built into the product to talk on the phone. • When your Bluetooth device receives a phone call, the product sounds a ring tone. • If a call is received while you are listening to music, music playback is paused. When you finish the call, music playback resumes.* When Receiving a call Talking on a call Operation Function Press the control button. Answers the call.
Indicator lamp display The indicator lamp of the product indicates the product's status as explained below. Status Pairing Indicator lamp display pattern Red White Searching for device Flashing every 0.
Cleaning Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes. • To clean, wipe with a dry cloth. • Wipe away dirt from the earpads and headband with a dry cloth. Sweat or water on the earpads and headband may cause the colors to fade. In this case, we recommend that you wipe them with a dry cloth and dry them out of direct sunlight.
Troubleshooting Problem Solution Power is not supplied. • Charge the product. Unable to pair. • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3') of each other. • Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual. • Remove the pairing information for the Bluetooth device then pair the product with this device again.
Specifications Headphones Type Closed-back dynamic Driver 40 mm Sensitivity 99 dB/mW Frequency response 5 to 35,000 Hz Impedance 32 ohms Microphone Type Electret condenser Polar pattern Omnidirectional Sensitivity -44 dB (1 V/Pa, at 1 kHz) Frequency response 100 to 10,000 Hz Communication specifications Communication system Bluetooth version 5.0 RF output 1.2 mW EIRP Maximum communication range Line of sight - approx. 10 m (33') Frequency band 2.402 GHz to 2.
Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan ©2018 Audio-Technica Corporation Global Support Contact: www.at-globalsupport.com 132416650-02-01 ver.1 2018.12.
