User Manual Part 16

Connecting via

Bluetooth

wireless technology

About pairing

To connect the product to a

Bluetooth

device, the product needs to pair (register) with the device. Once they are

paired, you do not need to pair them again.

However, you will need to pair again in the following cases:

• If the product is deleted from the

Bluetooth

device’s connection history.

• If the product is sent out for repair.

• If the product is paired with 9 devices or more.

(The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices, pairing

information for the device with the oldest connection date will be overwritten by the information for the new device.)

Pairing a

Bluetooth

device

• Read the user manual for the

Bluetooth

device.

• Place the device within 1 m (3.3') of the product to perform pairing correctly.

• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the

confirmation tone.

1. Starting with the product turned off, slide the power switch to the “ON”

position.

• The indicator lamp will light in blue, and then flash in red and blue.

• The product sounds a confirmation tone when pairing begins.

2. Use your

Bluetooth

device to begin the pairing process and search for the product.

• For information about using your

Bluetooth

device, refer to the device’s user manual.

3. Select “ATH-AR3BT” to pair the product and your

Bluetooth

device.

• Some devices may ask for a passkey. In this case, enter “0000”. The passkey

may also be called a passcode, PIN code, PIN number, or password.

• The product sounds a confirmation tone when pairing is complete.

ATH-AR3BT

MY DEVICES

Settings

Bluetooth

?RF+?P1@R]SK]T/]/.J]`mmi,glb`4 0./4-/0-04/2804