AEWCI Software Manual 5000 Series Artist Elite® Wireless Control Interface v. 3.
AEWCI Software Manual Introduction........................................................................................................................................................................................ 3 Our assumptions about you.............................................................................................................................................................................. 3 Notice to novice users...............................................................
AEWCI Software Manual Introduction Thank you for choosing an Audio-Technica professional wireless system. It is our hope that the system will bring you years of troublefree performance. Please follow the information contained in this manual closely, as it will assist you in using your equipment effectively.
AEWCI Software Manual Minimum Requirements Windows Microsoft® Windows® XP or later, including the following versions: • Windows 7 • Vista • XP Home • XP Professional Available hard drive space: 100 MB Ethernet port Java™ 6 or higher Set your monitor resolution to a minimum of 1024 x 768 pixels for best results. Lower-resolution settings (such as 800 x 600) allow for fewer channel strips to appear; as a result, you may need to scroll to see your entire environment. Macintosh Apple® Macintosh® OS X v.
AEWCI Software Manual Installing the Hardware Depending on how the AEW-R5200 receiver will be used, the installation and hookup process differs. For most applications, however, setting up the AEW-R5200 is a simple process. For example, if several receivers will be taken on tour and controlled via a computer, it will be necessary to set up a stand-alone network for use by only the computer and the receivers.
AEWCI Software Manual To connect one or more AEW-R5200 receivers to an existing network to which your computer is also connected: (Figure B) You will need an Ethernet hub and sufficient Ethernet cables to connect all receivers to the hub, plus one cable to connect the hub to the network. 1. Check with the network administrator to make certain the network you are connecting to supports DHCP. If it does not, ask the network administrator for assistance before proceeding. 2.
AEWCI Software Manual To connect a single AEW-R5200 directly to a computer's Ethernet card: (Figure D) For Windows® 1. In Windows XP, click Network Connections from the Control Panel choices. Double-click Local Area Connection. Select Internet Protocol (TCP/IP) and click Properties. Select Obtain IP address automatically and Obtain DNS server address automatically and then click OK. In Windows® Vista a. Start >Control Panel b.
AEWCI Software Manual To connect multiple receivers via link cables (for systems that include AEW-R4100 receivers, or for systems without access to multiple Ethernet connections): The AEW-R5200 receiver has the capacity to connect to other AEW-R5200 receivers and/or to AEW-R4100 receivers via the included link cables. No network is required for this configuration.
AEWCI Software Manual To set up remote access to the AEW-R5200 via the Internet: Warning: Accessing a company’s network through a firewall opens the network to security risks. This procedure should be set up and executed with extreme caution. Because DHCP routers may change each receiver’s IP address upon receiver reboot, connection to the AEW-R5200 receivers may be lost, and the remote user may gain unintended access to other areas of the network.
AEWCI Software Manual Navigating the Software Main System window (Figure F) The Main System window shows all of the active (enabled) receiver channels on the network. A vertical channel “strip” represents each channel. The window can be resized to view more channel strips. Alternate views (medium and small) can be selected by clicking the View menu.
AEWCI Software Manual Channel Detail Window - Control Function Settings Refer to Figure G (Page 10) for Control Function locations. Changing Receiver Name To assign a name to the receiver, access the Rx Name pop-up by clicking on the Edit button. Type in the name (up to six characters will display). Click OK or hit Enter to accept the change and return to the Channel Detail window, or Cancel to return to the Channel Detail window without making the change.
AEWCI Software Manual Navigating the File Menu Open Environment Use the Open Environment command to open a previously saved environment. An environment is a collection of receiver channel detail settings for the currently enabled receivers on the network. To open a saved environment: 1. 2. 3. Click on File>Open Environment. In the Open Environment input pop-up, select the name of the environment to open. Click OK.
AEWCI Software Manual Navigating the Tools Menu IntelliScan™ The IntelliScan command starts the automatic channel scanning and selection feature, which searches all available frequencies and sets all receivers in the system to the best open and compatible frequencies (within their frequency band). IntelliScan now examines each receiver’s RF environment to determine the best possible frequencies regardless of where each receiver is located. If receivers from multiple bands (i.e.
AEWCI Software Manual Caution: Any time you run Spectrum Analyzer, all receivers are muted during this process. Therefore, do not run Spectrum Analyzer at any time when system muting would be undesirable! Coverage Test The Coverage Test helps you determine where in the performance area your transmitters are strongest and where they are weakest by providing a graph of RF power vs. time. You may choose from seven test-duration times ranging from 30 seconds to one hour. To start Coverage Test: 1.
AEWCI Software Manual Navigating the View Menu The View menu gives you: Installing and Using the AE Reflector Service • • The AE Reflector service is a Windows software application that allows multiple computer users on the network to view, change and configure AE Wireless receiver parameters. You may install the application on one of the networked computers running the AEW Control Interface Software.
AEWCI Software Manual Audio-Technica Corporation audio-technica.