Owner's Manual
Table Of Contents
- User Manual
- Introduction
- Package contents
- Safety precautions
- Notes on use
- Part names and functions
- Preparation for use
- Placing the platter
- Setting up the turntable
- Assembling the tonearm
- Tonearm balance and tracking force
- Setting tonearm balance
- Setting tracking force
- Setting the anti-skate adjustment
- Installing/removing the dust cover
- Connecting the AC adapter
- Wireless/wired connection
- Connecting via Bluetooth wireless technology
- Setting pre-amplifier selector switch
- Connecting to connectable equipment (active speakers, amplifiers, etc.)
- Playing a record
- Care
- Replacing the stylus
- Replacing a cartridge
- When the turntable is moved
- Troubleshooting
- Dimensions
- Specifications
- How Do I Set Up the Turntable?
8
Preparation for use
Installing/removing the dust cover
• The dust cover is designed to protect the product's sensitive
components when the product is not in use. It should remain off
while records are playing.
• Using the dust cover during play may result in record damage or
sound degradation.
• Always remove and replace the dust cover carefully.
Connecting the AC adapter
Finally, after all audio connections are made, attach the included
AC adapter to the product. Then connect the AC adapter's cord to a
convenient AC outlet.
Wireless/wired connection
You can connect to a speaker, etc. via Bluetooth technology or RCA
audio cable.
When using Bluetooth, refer to “Connecting via Bluetooth wireless
technology” on p.9.
When connecting with the RCA audio cable, refer to “Connecting to
audio source” on p.10.
• Volume adjustment cannot be performed if there is no volume
adjustment on the connected speakers, etc.
Wired connection example
Amp / speaker
Wireless connection example
Wireless headphones
or
Wireless active speaker