Full Product Manual

Preparation for use

Installing/removing the dust cover

• The dust cover is designed to protect the product’s sensitive

components when the product is not in use. It should remain off

while records are playing.

• Using the dust cover during play may result in record damage or

sound degradation.

• Always remove and replace the dust cover carefully.

Connecting to connectable equipment (active

speakers, amplifiers, etc.)

Connect the RCA audio cable to an input jack that is compatible with

the connectable equipment you are using (amplifier, receiver, active

speakers, sound card, etc.).

• The RCA audio cable’s red jack is for the right (R) channel, and the

white jack is for the left (L) channel.

* Depending on the equipment you are connecting, a ground (earth)

terminal may exist near the phono input jack. If this is the case,

connect to it using the ground line from the RCA audio cable. This

will help prevent a low humming noise that might otherwise be heard

during playback.

Connecting the power cable

Finally, after all audio connections are made, attach the included

power cable to the product. Then connect the power cable plug to a

convenient AC outlet.

PHONO

L R

With PHONO input*

To outlet

Connectable

equipment

(amplifier, etc.)