Full Product Manual

Playing a record

Before playing a record

1. Remove the cartridge’s protector.

• If the tonearm is fixed to the tonearm rest, unlatch the clamp.

2. Turn the power dial to the ON position.

• The speed selector and strobe illuminator will light up.

3. If desired, push the button to use the stylus target light for

illumination of the stylus tip position on the record.

4. Place the record on the platter so that the center hole aligns with

the spindle.

• If playing a 45 RPM record, attach the 45 RPM adapter (see the diagram to

the right below).

5. Set the platter rotation speed (33/45/78) to match that of the

record.

• To set the platter speed for 78 RPM, press both the 33 and 45 RPM buttons

simultaneously.

Playing a record

Lower the volume of the amplifier, speakers, etc., sufficiently.

1. Press the START/STOP button.

• The platter begins to rotate.

2. Raise the tonearm by lifting the tonearm lift control lever to the

UP position.

3. Position the tonearm over the desired location (groove) on the

record.

45-RPM

adapter

At 33-1/3 RPM At 45 RPM

Record

Protector