AT-SP65XBT User Manual Wireless Speaker
Introduction Safety precautions Thank you for purchasing this Audio-Technica product. Before using the product, please read through the Quick Start Guide and Caution Guide, as well as this user manual when necessary, to ensure that you use the product correctly. Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.
Safety precautions – Increase the separation between the equipment and receiver. Cautions for rechargeable battery – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • The product is equipped with a rechargeable battery (lithium polymer battery). – Consult the dealer or an experienced radio/TV technician for help.
Notes on use • Be sure to read the connected device’s user manual before use. • Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. • In public places, keep the volume low so as not to disturb other people. • Minimize the volume on your device before connecting the product. • Do not subject the product to strong impact.
Part names and functions 1 2 3 6 1 7 8 6 Lights in blue when the power is on, and flashes blue while searching for devices to pair with. Also, the microphone is built into this part. Speaker unit 3 Battery jack (USB Type-CTM) 7 8 Multifunction button Use to play/pause music and answer/end phone calls. 9 Bluetooth button Use for pairing. Charging indicator lamp External input jack Use to connect an audio device with the included audio cable for wired connections.
Charging the battery Connecting via Bluetooth wireless technology • Fully charge the battery when using for the first time. • When the charge is low, voice guidance saying “Low battery” is played. • It takes about 3 hours to charge the battery fully. (This time may vary depending on usage conditions.) To connect the product to a Bluetooth device, the product needs to pair (register) with the device. 1. • Read the user manual for the Bluetooth device. • Place the Bluetooth device within 1 m (3.
Using the product The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices. Talking on the phone • If your Bluetooth device supports telephone features, you can use the microphone on the product to talk on the phone.
Using wired connections Cleaning Use the provided audio cable with 3.5 mm (1/8”) stereo mini-plugs to connect the product by wired connection to an audio device (computer, TV, turntable, etc.). Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes.
Troubleshooting Problem Solution Power is not supplied. • Charge the product. Unable to pair. • Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher. • Place the product and the Bluetooth device within 1 m (3.3’) of each other. • Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual. • Press the Bluetooth button.
Specifications Speaker Type Bluetooth stereo speaker Speaker unit 73 mm (2.87”) (full range) Maximum output 12 W (6 W + 6 W) Frequency response 90 to 18,000 Hz • The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. All other trademarks are property of their respective owners. • USB Type-C™ is a trademark of USB Implementers Forum.
